Thanks Aresius we'll see, might be just decoration, might make it an impulse.. don't know yet
Had some time last night to get some more detail done
I'm trying to keep my spirits up on this so I can finish it .. becasue i need some experiance on complex curves, and sphere's etc that are on this.. Not Easy is a word...
Bit more work on her.. worked on the warp ring a bit ( made the internals for it.. still sorting out the final shapes etc.) and started on the lower main hull. definatly not done yet with that.. need to get it to smoothly transit in to the neck.. and stuff... Love a challenge! ( if its not too challenging!)
Well I HAVE been working on this.. but its been mostly rebuilding the Neck and Lower part of the hull for what must be literally 50 times.. and still going.. I think I'm on the right track now. .just needs a bit more refining.. but .. havent given up on this.. which is good
so couple of renders to see where I'm at.. completly redone the neck.. looks alot closer to the refs to me, and better in general.. still needs some stuff. but steady on
Its not from Enterprise, its from a sketch from John Eaves for a potential Star Trek Online ship.. ( though it is inspired by it ) So to me, how I'm building this is a Post- Nemesis design not Pre-Tos
Done working on a private project.. so getting back in to it..
so.. Here's the Ivalace Class .. designed by Galen/Kaden ( good stuff!)
been working on this abit.. the Saucer and Eng hull are almost fleshed out, working on the Naccelles
after this ship.. something big I think.. or finish of the myriad of droped projects maybe!!
We put one on the back (at one end of the dual phasers) and 3 on the front (two on the saucer on either side of the diamond like sensor parts and one on the underside on the part behind the registry). You should be able to see them on Galen's drawing.
I figured its small and quick enough to just have the one at the back.
oh haha the rear shuttle bay, the shuttle pods come into it upside down!
Before I ever saw this class, I had designed a more future based sketch for James Midsen's thread that looks eerily similar to this. I think I fancy the layout and I'm glad to see you taking a crack at another lesser known ship. Nice work so far. :thumb:
Okay, Deceided to concentrate this month on all my models that I have Abandoned!
So, this "Renewal" is concentrating on 4 ships, The Norway class, Sabre Class, Steamrunner Class, and My Romulan ship, Ivarix Class!
There all mostly done, but most are 3 years old or more, and I've come a long way since then, and I'm tweaking them! Most just need textures and details finished.
Been meaning to do this for awhile, and am going to tackle these before I start something new!
Since there's a limit to images on here, here are images of the ships from the past!!
Posts
Thanks Aresius we'll see, might be just decoration, might make it an impulse.. don't know yet
Had some time last night to get some more detail done
I'm trying to keep my spirits up on this so I can finish it .. becasue i need some experiance on complex curves, and sphere's etc that are on this.. Not Easy is a word...
more on this latter
Bit more work on her.. worked on the warp ring a bit ( made the internals for it.. still sorting out the final shapes etc.) and started on the lower main hull. definatly not done yet with that.. need to get it to smoothly transit in to the neck.. and stuff... Love a challenge! ( if its not too challenging!)
so couple of renders to see where I'm at.. completly redone the neck.. looks alot closer to the refs to me, and better in general.. still needs some stuff. but steady on
redone the neck (again...) and this is Almost the final product.. just working on the conections to the primary hull and the eng hull.. so..
more next week!
so.. Here's the Ivalace Class .. designed by Galen/Kaden ( good stuff!)
been working on this abit.. the Saucer and Eng hull are almost fleshed out, working on the Naccelles
after this ship.. something big I think.. or finish of the myriad of droped projects maybe!!
EDIT: forgot to put up the plans i'm goin off of
more work on her
worked on the warp engines.. getting everything smoothed out and looking good
next? sheild grid maybe.. we'll see
Pictures!
Here are some 3d drafts I made way back to help with the shape for the drawings, might also give you some ideas for shapes.
Look forward to seeing more!
question.. where is the torpedo launchers on this? front and back??
I'll make sure to give you a copy when I'm done!
I figured its small and quick enough to just have the one at the back.
oh haha the rear shuttle bay, the shuttle pods come into it upside down!
finalizing the eng hull.. more complicated than it looks.. either that or I'm gettign senile!
More soon!
finish out that area latter today, but seeing Die Hard 23 Die Hardererererer tonight !:rolleyes:
Thanks guys!
and yes... the mini bay in the middle is Upside down! ( according to the designer... ... okay!)
not much room in there ( then again.. not an overly large ship to begin with (120 meter? haven't measured yet))
so more latter!
Big render!
so going nicely.. just slowly
Nice work.
So, this "Renewal" is concentrating on 4 ships, The Norway class, Sabre Class, Steamrunner Class, and My Romulan ship, Ivarix Class!
There all mostly done, but most are 3 years old or more, and I've come a long way since then, and I'm tweaking them! Most just need textures and details finished.
Been meaning to do this for awhile, and am going to tackle these before I start something new!
Since there's a limit to images on here, here are images of the ships from the past!!
First Contact Ships
Ivarix Class
So working on the Norway, and Ivarix some large renders of the Ivarix!