Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DScifieric's 2019 USS Enterprise

scifiericscifieric881 Posts: 1,292Member
edited January 2020 in Work in Progress #1
I lost my tutorial Enterprise in a mirrored RAID hard drive crash. Both drives failed.

So, I am working on a new model and I intend to make it more accurate than the Tutorial ship.

I've only just started, but here is the progress thus far.

(*Edited to give a new image to the front page.*)
86Signs-G.png

6z3lxa5g5h1p.png
vhi2h5o7yv0d.png
tsncx3e090w4.png
e399u6kutwao.png
dcepin8uhdd3.png
20pgd8lurvpq.png
pj246txdc19r.png
wyfw0lbzoejn.png
h96rsq23cwf2.png
6s79lat4g2hn.png
1efbaw8ckpa2.png
31tkyhk3uo33.png
Post edited by Guerrilla on
ashleytingerLizzy777xiaorobearevil_genius_180BrandenbergP5ych0p4thFreakRekkertMadKoiFish
«1345

Posts

  • evil_genius_180evil_genius_1801854 Posts: 9,999Member
    That's looking fantastic so far, Eric. :)
    scifieric
  • BrandenbergBrandenberg1556 CaliforniaPosts: 1,872Member
    edited October 2019 #3
    So clean. Superb-o (My 1000th post)
    Post edited by Brandenberg on
    scifieric
  • scifiericscifieric881 Posts: 1,292Member
    That's looking fantastic so far, Eric. :)
    Thank you, Chris!
    So clean. Superb-o (My 1000th post)
    Thank you and congratulations!
  • trekkitrekki491 Posts: 1,042Member
    Oh yes, thats very nice
    scifieric
  • scifiericscifieric881 Posts: 1,292Member
    trekki wrote: »
    Oh yes, thats very nice
    Thank you!
  • BolianAdmiralBolianAdmiral748 Torrance, CaliforniaPosts: 2,171Member
    As stated above, so clean. I’m always blown away by what the folks here can do with Blender.
    scifieric
  • MadKoiFishMadKoiFish4458 Right in the plumsPosts: 4,605Member
    Sucks to hear about the array. They just do not seem to make hdw as well as they used to. Still have drives from the 90s that work. Modern stuff, Meh lasts 2yrs at most now. Or worse lasts up to one write on the sectors if that then dies.
    scifieric
    Each day we draw closer to the end.
  • scifiericscifieric881 Posts: 1,292Member
    As stated above, so clean. I’m always blown away by what the folks here can do with Blender.
    Wow! Thank you! I appreciate that.
    MadKoiFish wrote: »
    Sucks to hear about the array. They just do not seem to make hdw as well as they used to. Still have drives from the 90s that work. Modern stuff, Meh lasts 2yrs at most now. Or worse lasts up to one write on the sectors if that then dies.
    I'm with you on that one! Some of my slow, old drives are still going. These are about two years old. Go figure. Nice to see you around, man!
  • scifiericscifieric881 Posts: 1,292Member
    Oddly, even though I've been thinking throughout the week about how much I wanted to work on the model, when the weekend got here (I've been on call all week) I was too tired!

    But, I changed the angulation and placement of the pylons and changed the positioning of the temporary warp engines. I did a couple of quick test renders to see how they compared with screen captures, even though I have no idea about the camera type nor the lenses used in the original series. Anyway, I figure they're close enough to warrant continuing. But, I'm open to opinions.

    04g1e8i1q1ex.png

    q3in1vy1rm0m.png

    57o8j0kz175l.png
    XFozzbouteRekkertevil_genius_180ashleytingerLizzy777P5ych0p4thMadKoiFishFreakBrandenberg
  • trekkitrekki491 Posts: 1,042Member
    Very nice, Love IT!
    scifieric
  • scifiericscifieric881 Posts: 1,292Member
    trekki wrote: »
    Very nice, Love IT!
    Thank you! I'm enjoying myself!
  • scifiericscifieric881 Posts: 1,292Member
    A very small amount of progress.
    56PilotBridge-D.png
    61Progress-A.png
    61Progress-B.png
    61Progress-C.png
    61Progress-D.png
    61Progress-E.png
    The next two images show that I am making both the pilot version(s) and the production version(s).
    61Progress-F.png
    61Progress-G.png
    evil_genius_180Lizzy777lewisnivenFreakBrandenberg
  • ComcoComco310 Posts: 1,273Administrator
    Looking great, Eric. Damn shame to hear about the drive crash. I back all my 3d stuff up to the cloud these days. I can't bare the thought of losing all the stuff I've built and accumulated over the years. :)
    scifiericlewisniven
  • scifiericscifieric881 Posts: 1,292Member
    That sounds like a very good idea. And thank you!
  • lewisnivenlewisniven1850 UKPosts: 381Member
    Comco wrote: »
    Looking great, Eric. Damn shame to hear about the drive crash. I back all my 3d stuff up to the cloud these days. I can't bare the thought of losing all the stuff I've built and accumulated over the years. :)

    Same, everything I do is off a OneDrive, it's definitely worth doing. Model looks spot on too, very clean geometry.
    scifieric
    1701dproject.blogspot.com
  • scifiericscifieric881 Posts: 1,292Member
    lewisniven wrote: »
    Same, everything I do is off a OneDrive, it's definitely worth doing. Model looks spot on too, very clean geometry.
    Thank you, lewisniven!
  • scifiericscifieric881 Posts: 1,292Member
    A little work on the warp engines last night.
    cmnmbavtswle.png
    ljt4293181yb.png
    g9as0cdu75aj.png
    Lizzy777Freakevil_genius_180BrandenbergMadKoiFish
  • evil_genius_180evil_genius_1801854 Posts: 9,999Member
    As always, your details look accurate and fantastic.
    scifieric
  • BrandenbergBrandenberg1556 CaliforniaPosts: 1,872Member
    @scifieric : Sorry about your drive crash. Thumb drives are so cheap now, I keep 3 copies of everything because...
    I've had crashes too :#
    scifieric
  • scifiericscifieric881 Posts: 1,292Member
    As always, your details look accurate and fantastic.
    Thank you, my friend! I am hoping to make this the most accurate version I've ever made.
    @scifieric : Sorry about your drive crash. Thumb drives are so cheap now, I keep 3 copies of everything because...
    I've had crashes too :#
    I am very sorry to hear it. Yeah, I had a mirrored external drive, and both of those drives crashed without warning. I have a new drive from a more expensive manufacturer that I've always had luck with at work, and I'm going to back this one up on other media. I'm not without a model, I just want one that is more accurate than the one I made two iterations ago.
    evil_genius_180
  • BolianAdmiralBolianAdmiral748 Torrance, CaliforniaPosts: 2,171Member
    Just beautiful!
    scifieric
  • scifiericscifieric881 Posts: 1,292Member
    Just beautiful!
    Thank you, my friend!
    BolianAdmiral
  • Chris2005Chris2005495 Posts: 3,055Member
    I need to start putting more stuff of mine in the cloud... and on the subject of the model itself thus far, I'm blown away. :D
    scifieric
    AMD Ryzen 7 3700X
    EVGA RTX 2060 KO 6GB
    240GB SSD, 500GB SSD, 1TB HDD, 4TB external HDD
    16 GB RAM
    Windows 10 Pro
  • scifiericscifieric881 Posts: 1,292Member
    Chris2005 wrote: »
    I need to start putting more stuff of mine in the cloud... and on the subject of the model itself thus far, I'm blown away. :D
    Wow, Chris, thanks!

    I made the grills tonight and a couple of other bits. Getting there slowly.
    139uk5fbcxlt.png


    Lizzy777MadKoiFishevil_genius_180Brandenberg
  • scifiericscifieric881 Posts: 1,292Member
    Some detail.
    n2k0eut9xfki.png
    MadKoiFishWarp Propulsion LaboratoryLizzy777evil_genius_180FreakBrandenberg
  • trekkitrekki491 Posts: 1,042Member
    Very nice details and the mesh is great !
    scifieric
  • scifiericscifieric881 Posts: 1,292Member
    trekki wrote: »
    Very nice details and the mesh is great !
    Thank you!
  • XFozzbouteXFozzboute651 Posts: 1,627Member
    Stunning work. as always.
    scifieric
  • scifiericscifieric881 Posts: 1,292Member
    XFozzboute wrote: »
    Stunning work. as always.
    Thank you, my friend. I hope you are well!
  • Chris2005Chris2005495 Posts: 3,055Member
    Are you basically going for a "4k" version similar to what Marc Bell has done with some of his Trek stuff with the level of detail?
    scifieric
    AMD Ryzen 7 3700X
    EVGA RTX 2060 KO 6GB
    240GB SSD, 500GB SSD, 1TB HDD, 4TB external HDD
    16 GB RAM
    Windows 10 Pro
Sign In or Register to comment.