› ›
Avatar

Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

Sign In Register

Badges

RYUTARO YAMADA

About

Username
RYUTARO YAMADA
Joined
Visits
32
Last Active
Roles
Member
Points
347
Posts
0
Badges
7

Reactions

16 Like0 Promote0 Warning

  • NCC-1701 Refit Ver. 3.0

    RYUTARO YAMADARYUTARO YAMADA
    Sorry for the late reply.
    wjaspers wrote: »
    Almost correct, except the part of where it starts, it allready starts as a tube at the beginning, that what's the nacelle is made off, a 4" tube.

    Instead of posting an ugly picture in this thread here is a link to it:
    http://i131.photobucket.com/albums/p298/wjaspers/STMPent29.jpg

    In the background you see a picture of the 1701, the red arrows are where the tube starts, upper left a cross section of it, bottom left the one from RYUTARO, bottom right the one from BCL323. Maybe not a big issue, but try and do the dock sequence from TMP, you surely will notice it.


    Thank you for pointing out.
    Modifying the shape of the cross section is likely to take time.

    The Vorlon wrote: »
    The nacelles look fine to me, but the pylons seem much too thick, especially at the top where they meet the nacelles. The real pylons on the filming model are the same thickness in the middle all the way up, and thin to the front and rear, as far as I know. I can't find any good pics of that, though.


    to joint surface of the pylon and nacelle, There is very thick.
    and there is no uniform thickness.
    The Official drawing too thin pylons.
    86692.jpg
    eagledocf15

  • NCC-1701 Refit Ver. 3.0

    RYUTARO YAMADARYUTARO YAMADA
    This is my third Refit.
    Please note especially the shape of the secondary hull.
    scifieric

  • NCC-1701 Refit Ver. 3.0

    RYUTARO YAMADARYUTARO YAMADA
    Hello.
    So, I posted a long time.


    This model is a challenge of me three times, and aims to be definitive.

    Several years, we have continued to struggle with it, shape, and for the balance is achieved in terms of thinking it's not the answer.

    For modeling work has been posted near the end of it.


    Unfortunately, I can not post very often.

    Since I am not good at English, if you have strange expression, I'm sorry.
    97261.jpg
    eagledocf15scifieric