NemVia

I've finally put together a video of my Enterprise in Drydock. It took several tries and several reshoots of certain scenes, but it's all together now. This is my version of the flyby scene in ST:TMP minus the dialog and intercuts with the travel pod. I had to extend some of the shots to fill in those gaps. I could insert the scenes to combine my footage with the movie, but the video is primarily about the Drydock model. Also because of the size of my video shooting equipment I added a different of the shot by filming it from a different angle. I also had to match the scenes to specific parts of the musical score.
This is my personal homage to one of the greatest filming miniatures ever made for the big screen: The Star Trek: The Motion Picture Drydock and of coarse the DeBoers Refit Enterprise model. To make this video, I tried to match as many of the same camera angles that were the movie as possible. There's no dialog except for a little treat at the end to finish the video clip off with.
The flyby video was filmed using a JVS Everio HD camcorder and was mounted on a Andoer camera dolly track system. The video was edited together using Wondershare Filmora9 editing system. Some of the shots where accomplished by mounting a selfie-stick to the camera dolly to get into the more cramped areas of the dock. Most everything was shot against a black velvet background, except for the long shots. I just didn't have enough velvet material to do this. I just had to hide the source lighting out of camera view and film with the room totally dark, except for the models own lighting. The long shots didn't come out as clear as I wanted, but as we zoom into the model for the closer shots, the details become very clear. I would have loved to add all of the work bees, travel pods and space walkers into the shots, but that will have to wait for some time in the future when I have the ability and time to do all of that. This was never meant to be the high quality Cinemamatic version of this now famous scene in the movie, but rather a way to show off the model. I hope you enjoy the video. Sorry about the long intro, but I needed something to fill in the beginning. Jerry Goldsmith's theme just has to be played in it's entirety. Also ear-buds or headphones are recomended for an awesome viewing experience. (click the youtube link below)


Likes and comments are welcome.

Mark
http://www.NemVia.org

JANUARY UPDATES - 2020
Well, it's now 2020 and so far, this year has not started off well in the DeLorean build department. I received Issues 88 through 91 in December, but found out that there were two things that needed to be taken care of before I could move forward on the build. 1) and most importantly, I discovered that while trying to add the assembly Issue 91 to the engine which, by the way is the engine air filter assembly, I found that I had put the left and right air intakes, on the manifolds, facing the wrong direction. A major OOOPS! I decided to put off working on this project until after my peak season at work, otherwise I was going to hurl the car at the basement wall and be done with it. This was a bit frustrating, too because I still have not received Issues 75, 76, and 77, and it's now going on four months, with a new complaint letter sent in every month I don't get these Issues. And in order to move forward on the build, I need the parts from those Issues. Issue 74 is still in it's parts bag because I have nowhere to put these pieces. Anyway, when things calmed down at work I decided to fix the manifold problem. This gave me something to do while waiting for the next Issues. I had to reverse engineer how to get the manifolds off and turned around to the correct position. I did have to remove the engine to get to the manifold, but I finally got it into it's proper position, and now the air filter and other system pipes fit very nicely. But that's not all... You're not gonna believe this one.... I get my usual notice that my Issues would be mailed out, but I didn't pay attention to which ones I would get until they were delivered. so now, I'm not only missing 75, 76 and 77, but now I didn't get 86, 87 and 92 and 93. What I received are Issues 94 - 97 but I don't have the other Issues to assemble these parts together. (I guess you could say I have Issues with my Issues) So I'm not going to even open the parts bags for these until I get the other parts. Man! what a disappointment. And still no word from Eaglemoss on this problem But!!!! I still have posted some interesting pics of what I was able to get done despite not having what I need. I've assembled what I could starting from Issues 82 - 85, then 88 - 91. Some of the interior parts were added, such as the seatbelt harness pieces and of course the air filter assembly. The engine cover is made from metal and the detailing on the grates is quite awesome. But this is about all I was able to do for the last two months. So there are 49 new pics in the 1/8 scale BTTF DeLorean page. I hope you can at least enjoy those. That's all for now, keep checking my site to see if those missing Issues will ever get here!
Take care, Mark
https://www.nemvia.org/apps/photos/p...toid=206058226
http://www.NemVia.org

deadmaster wrote: »

wow nice model.

Thanks Deadmaster… here's another update.....

NOVEMBER UPDATES - 2019

Hey everyone! Well, still no word on when I'll receive my missing issues which are now Issues 75, 76 and 77. I really don't know what Eaglemoss will be sending me until I get my next automated order. They did send me Issue 74 which is the issue that has the hinge panel for the passenger side gull wing door, so I was able to get that into place, and I also received Issues 79, 80 and 81. 79 & 80 are the passenger side rear panel and trim assemblies, which are very easy to assemble. Issue 80 also has similar parts to Issue 78 which are the trim pieces for the rear panels as well as the mounting brackets for some of the lighting effects. Issue 81 has a part called the "engine surround" which will eventually be filled up with wiring and more greeblies. I have 17 new pics added to the 1/8 scale BTTF DeLorean page which includes the pics and parts for Issue 74 which is now in sequential order. Now, depending on when my next shipment will get here will determine if there will be an update for December. My busy season begins next month so I might not have too much time or energy to get anything done. If not, there will be a big update on January of 2020. Who knows. Well, that's it for this update. Keep checking the website and we'll see you next update!
Mark
https://www.nemvia.org/apps/photos/photo...=205996566
http://www.NemVia.org

They have a lot of highly detailed kits from many different genres.
Here is their link
https://shop.eaglemoss.com

OCTOBER UPDATES - 2019

Okay, back to work again, with a bit of disappointment included with this group of issued. Although I was forewarned that this was going to happen, it still is a bit irksome. Eaglemoss sent me a message a few days after I posted the September supplemental update saying that their suppliers had run out of one or more of the next upcoming issues. I wasn't totally sure what to expect, but I was under the impression that I wouldn't receive anything from them for a month or two, but the following week I saw that I was billed for my next 4 Issues. I didn't look too closely at the issue numbers on the billing invoice, but I thought that the issue with the out of stock issues was remedied. I received my box and opened it up as usual to photograph the Assembly instruction booklets and I saw that I received Issues 71, 72, 73, and 78. A little distraught I re-checked the email invoice and it matched what I received. A little bummed about what I got, I proceeded with the assembly up to 73. I can't do anything with issue 78 until I receive Issue 75, 76, and 77, so 78 will have to be put aside until Eaglemoss catches up with their distributers. I think I would rather have waited for the proper issues came in the correct order, but here we are. So, what I was able to do this month was assemble just the door parts and the door for the passenger side, but Issue 74 didn't come which contains the hinge assembly parts to connect the door to the car frame, so I will not post an overall progress pic for this update. However, since I received some of the MODs that I wanted I was able to add those into the car for this update. The MODs include the car floor mats, a new Xmas tree component and a more detailed version of the Flux Capacitor. Both of these contain much better lighting effects that are closer to the screen version of the car. Hopefully by the next Issue cycle, everything will be caught up and I can give you a better progress update. But, I do have 26 new pics added to the 1/8 scale BTTF DeLorean page, so check them out and let me know what you think! More to come, keep checking for the November Updates
Mark
The top link will take you to the latest pictures, the bottom link will take you to the homepage.


https://www.nemvia.org/apps/photos/photo?photoid=205952494
http://www.NemVia.com

SEPTEMBER UPDATES - 2019
New exterior car body pieces arriving, finally! It's nice to work on some of the small details for this build, but every now and then it's great to see the larger parts arrive in the mail as well. This month I received Issues 63 - 66 and these included the Hood and framework for the trunk, the trunk interior and some more switches to operate the dome light when the doors are opened. All 4 of these issues are relatively quick to put together. The hood is made from metal as well as the air-pistons that are used to hold the trunk open. The pistons did have an issue, though. When opening the hood the mounting bracket pieces that are in the pistons would pull out from the metal tubes. I used some Maxi-cure to re-cement them into the tubes. This seems to work. But the reason they probably pulled out in the first place is that the piston tubes are very hard to pull open and slide closed. So I opened the hood as far as it would go, got some WD-40 and sprayed it on a tissue, then rubbed it onto the smaller part of the piston that slides into the larger tube. After a few open and closings, the pistons operated a lot smoother and I don't have to worry about the brackets being pulled out again. (I hope) For some of the smaller details in ISSUE 66 there are some more springs and door catches to assemble as well as the door locks which contains some micro switches, these also had some tiny springs to add in. Not very fond of those. I did have one fly away from me in an earlier issue, but fortunately I found it. Sometimes you need to work on these tine parts with over a white floor just in case something like this happens. (Wish I had a white floor) So, with these Issues, the piece-count for the build so far is about 1,079 pieces, including screws and wiring, etc. I haven't done this in a while, but the car now weighs in at 13.1 lbs (5.94kg). As a young Marty would say: "That's heavy, Doc". The weight includes the front left fender and the bumper assembly. I'll have to use a different scale next time because the one I'm using is for small measuring, up to 13 lbs. (5.89 kg)
Anyway, there are 23 new pics on the "1/8 scale BTTF DeLorean" page, so check 'em out and let me know what you think!
In the next issue (67) I will be receiving the driver's side door assembly. I'm really looking forward to that. Thanks for checking the sight! More to come next month!


https://www.nemvia.org/apps/photos/p...toid=205880178
http://www.NemVia.org
Attached Thumbnails