Avatar

Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

Badges

calamity_si

About

Username
calamity_si
Joined
Visits
34
Last Active
Roles
Member
Points
361
Posts
369
ArtStation
@Scifi Shipyards
Facebook
Scifi Shipyards
Instagram
@@scifi_shipyards
Badges
8
  • U.S.S. UNIVERSE, NX-2999

    9gzq2pbnmocb.jpg
    .
    StarCruiserStarshipLizzy777evil_genius_180wolfman
  • U.S.S. UNIVERSE, NX-2999

    Some more stuff I've completed today.
    o7q59gp44bmy.jpg
    StarCruiserLizzy777evil_genius_180wolfman
  • U.S.S. UNIVERSE, NX-2999

    ecz9ur16gnnv.jpg
    ujolxij09xes.jpg
    haa0kmjwq8a9.jpg
    evil_genius_180StarCruiserpubliusrLizzy777
  • U.S.S. UNIVERSE, NX-2999

    Cloaking device.
    USS-UNIVERSE-manual-P7.png
    CONSOLE-GLOW-CLOAK.png
    StarCruiserLizzy777evil_genius_180wolfman
  • U.S.S. UNIVERSE, NX-2999

    Some new pages for the tech manual.
    USS-UNIVERSE-manual-P4.png
    USS-UNIVERSE-manual-P5.png
    USS-UNIVERSE-manual-P6.png

    evil_genius_180Lizzy777StarCruiser
  • U.S.S. UNIVERSE, NX-2999

    Hi all,

    So this design is based on a ship that was briefly described in a book called 'Serpents among the Ruins', which I first read over 20 years ago (wow, has it really been that long?) and the description of the USS Universe always intrigued me.

    I've just reread the book and I still found it really enjoyable and thought that I'd look online to see if anyone had ever realised the design and to my surprise, no one ever has! So I decided to change that.

    The book is set in the 'lost era' period of 2311 and is based around the crew of the Enterprise-B. I won't ruin the plot, but basically the ship is designed to be a testbed for a new Hyperwarp Drive system.

    The description given by the author is as follows:
    "With a particularly wide beam and shallow depth, the starship looked as though it had been compacted top to bottom, and spread port and starboard. The primary hull, a narrow ellipse with its major axis running fore and aft, had no rise to it at its center. The secondary hull, another level, narrow ellipse, but smaller, connected to the primary hull directly, the forward section of the former lying directly below the aft section of the latter. A pair of thin struts, angling backward, connected each of the two warp nacelles to the secondary hull. The nacelles themselves were flat and wide, flaring out broadly from their midpoints aft. The two-hull, two-nacelle alignment suggested a resemblance to other Starfleet vessels, but departed dramatically from those other designs in execution."​

    For those who may be interested, there's a whole discussion topic on this ship and it even features some imput from the author of the book. That can be found at TREKBBS here: https://www.trekbbs.com/threads/serpents-among-the-ruins-uss-universe-nx-2999.101938/

    But without further ado, here's my final design for the ship and it's main bridge:
    qb8c1nvci1g5.jpg
    b9xl768dz9px.jpg
    vwy7zpz6cyfd.jpg
    55klisv4vc8l.jpg
    qhz4cc1hz8cx.jpg
    bsuagiavaprd.png
    k8neqxhvd91r.png
    8onyh8vpo9fx.png
    StarCruiserLizzy777evil_genius_180
  • The USS Archer

    USS_Archer2.JPG
    A pretty poor sketch of a ship I've designed for the ST universe.
    JES
  • Star Trek Interiors

    Rekkert, your interiors are just absolutely epic! 😁👍👍👍
    Rekkert