Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DNot a reboot

11820222324

Posts

  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Started to add some windows.
    2600.jpg
  • Hunter GHunter G1905 Posts: 543Member
    The grids look fantastic! I also love the beveling on all the connected parts, giving it a very clean look.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thanks.

    UPDATE...
    More windows and stuff.
    2601.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thanks.
    UPDATE...
    A few more small details added including RCS thrusters and an idea for a phaser turret.
    2602.jpg
    Added more windows and some minor detail. The top of the saucer is almost done.
    2603.jpg
    A closer look at the laser turret.
    2604.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I lost almost all of the work I did on this ship when my computer died, so I’m basically starting all over again.
    2656.jpg
    2657.jpg
  • kvorshkkvorshk171 Posts: 76Member
    It looks like you are bringing it back well though.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    More stuff getting done. It’s getting close to where I ended last time.
    2658.jpg
    I was thinking of adding something like this to the back of the ship to act like an AWACS.
    2659.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Started to get the warp engine in shape. It’s starting to the way it should.
    2660.jpg
    A few more things added to the saucer.
    2661.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    RCS thrusters have been added.
    2662.jpg
    The warp engine and pylon are finished.
    2663.jpg
    And I’m starting to add windows to the saucer.
    2664.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Doing a little fiddling around and did a little work on the secondary hull. Just need to make a nav dish now.
    2665.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Started to block in shapes for a possible Kobayashi Maru.
    2666.jpg
    2667.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Got more stuff added. I’ve started to place windows on the saucer rim. There’s not enough room for two sets decks of windows but I think I’ll do it anyway just because it looks better.
    2668.jpg
    I also added the shuttle bay and some air locks. I’ll probably get rid of the aft airlock because I don’t like it. And I will increase the size of the secondary hull because the shuttlebay feel a little small.
    2669.jpg
  • Vortex5972Vortex5972321 Posts: 1,202Member
    Having two sets of windows where decks wouldn't fit never stopped them with the Connie. :p
    You could always say that they're windows for top and bottom bunks in crew quarters.

    It's all looking good so far.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Started to work on the lower saucer.
    2670.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    The bottom of the saucer is done I think. Finished up some details and added phaser hatches.
    2671.jpg
    I also added phaser hatches to the top of the saucer.
    2672.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    It’s been awhile but I finally got back to this ship. I am actually feeling good working on this one I think it might be one of my favorite ships that I’ve made.
    I had to remake this bit.
    2711.jpg
    I added these two bits to the engine and I think it’s done.
    2712.jpg
    I’ve also started to detail the awacks system.
    2713.jpg
    And just for fun I started on this because I just finished watching DS9 for the millionth time.
    2714.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    As far as I’m concerned the tower is done.
    2715.jpg
    2716.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    UPDATE...
    Just a few more windows. I still need to add some to the bottom of the saucer. I’ve yet to move it into mental ray. I think I’ll do that after the modeling is done.
    2717.jpg
    2718.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Started to get some panel lines in. There’s some messy bits on the side I’m not happy with but I’ll figure something out.
    2719.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Got a bit more work done. added more panel lines and a little other things. Worked more on the airlock. Just need to do a few other things and I can move onto textures.
    2720.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Added more panel lines to the bottom.
    2721.jpg
    I also added a few windows to the bottom of the saucer. Just about finished with is thing just want to go around and add few little things.
    2722.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I know I was thinking about adding few more other small bits of detail but looking the thing over I don’t feel I need to. Just needed to finish a few things off and maybe fix a few things that needed fixing. So I finished of the shuttle bay door.
    2723.jpg
    2724.jpg
    I also added a nav light to the bottom of the ship.
    2725.jpg
    2726.jpg
    I also decided to start to remake the phazer turret. It’s not as good as the first version I lost but it still works for me.
    2727.jpg
    2728.jpg
  • BolianAdmiralBolianAdmiral1114 Torrance, CaliforniaPosts: 2,560Member
    I like that whole aft saucer addition... makes it look kinda like there's a Star Destroyer stuck to the saucer. :p
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Finished up the phaser. I like it.
    2729.jpg
    2730.jpg
    This is how it looks deployed.
    2731.jpg
    Moved into Mental-Ray so I can start work on the textures.
    2732.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Starting work on some test textures. But before I get deeper into it I need to install lights and get rooms behind the windows.
    2733a.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Getting the ship’s lighting finished up and started on the rooms behind the windows.
    2734_00000.jpg
    A bit more texture work.
    2735_00000.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    More windows getting done. I was thinking that each deck gets a different colored carpet. Not that you can see the carpet but itA’s the thought that counts.
    2736.jpg
    2737.jpg
  • StarshipStarship464 São Paulo - BrasilPosts: 1,976Member
    Coming along in a very nice way Rob! :thumb:
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thanks. I'm really happy with it so far.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Starting some very early textures for the phaser turrets.
    2800.jpg
Sign In or Register to comment.