Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DShips of the Federation Civil War

13132343637

Posts

  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    The rim detail is just about done and I added a few other bits near the lifeboats.
    2405.jpg
    I’m also thinking about doing a version of this runabout.
    16868189732_87ff451b91_b.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Decided to take a break from the work on my house and go back to some ship building so I added more stuff the the engine of this ship.
    2520.jpg
    2521.jpg
    2522.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    A little bit more added to the bottom and side of the engine.
    2523.jpg
    This is the current placement of the engine.
    2524.jpg
    But I was thinking I might move it a bit to here. Not sure if I like it.
    2525.jpg
    I also decided to add something to the bottom of the sphere.
    2526.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    More work on the warp engine. Added a few things to bottom. I think I’m close to done with it.
    2527.jpg
    Added torpedo/probe launchers and did some work on the shuttle bay.
    2528.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    A few more details added to the back of the ship.
    2529.jpg
    Starting to finish work on some sensor pallets and I also added what might be lifeboats.
    2531.jpg
  • TALON_UKTALON_UK2 Posts: 0Member
    Ooooh, I quite like that. Your take on a Daedalus style design?

    :thumb:
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Kinda, I thinking more about the medical ship Crusher commands in All Good Things.

    UPDATE...
    Decided to go back and work on the Sagan class for a bit. The forward upper part is done and I added more windows to the side.
    2538.jpg
    Started to add a little more to the lower forward section.
    2539.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I’ve added a few more things. A transporter emitter on the nose of the ship. I’ve added grid lines to the side of the hull. A few more greebles added to the sensor pallets and finally a couple of life boat hatches to the top.
    2540.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I added a few more windows and more details to the forward side section. I think that will be about it.
    2541.jpg
    I just did this to see if the new video copilot plugin Saber would make a decent phaser shot. It was just a test so it’s not perfect and with a bit more tweaking it could work.
    2542.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Did a little more work on the impulse engine and added a few more bits.
    2543.jpg
    Just a close up of the bits I added.
    2544.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    My tablets been a little pissy these past couple of days so I haven’t gotten too much work done. But I did work a bit on the back of the ship.
    2545.jpg
  • SchimpfySchimpfy396 Posts: 1,632Member
    Looking good. Are you planning on cleaning up that segmentation? Just curious since you have smaller details throughout the rest of the ship that hold up much closer than this last render.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    I might clean it up, don't feel much of a need since I would only get this close for wip shots.
    UPDATE...
    I’m starting to finalize the sensor pallets. Added a few more life boat hatches and started to place more windows. There wont be many. I also couldn’t decide on a place for a rear phaser strip so I decided to make a phaser turret to save space.
    2546.jpg
    A close up of the phaser turret.
    2547.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I finished the windows and decided to add a few to the back. I also added grid lines. A few things need to be fixed so I’ll get to that next.
    2548.jpg
  • scifiericscifieric1122 Posts: 1,497Member
    Your work is always great! This is looking terrific. I like the details.
  • FANGsFANGs414 Posts: 79Member
    Looking good, but i fear, the turret could be a little bit ineffective: if firing exactly backwards, the beam could damage the ship's own hull. Abrams got another Turret design for the kelvin (Yes, ball-turret). Maybe this would be more practical?
    Or change slightly the turret attachment?(found this ancient photo ->)Picture 002.jpg (
    110574.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    I don't see any need to change it. I like it the way it is.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Decided to do a bit of work on my version of relay station 47.
    2621.jpg
    A full body shot just to give an over all look.
    2622.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Just about done with this part of the station. Since my last hard drive death I’ve thought about not doing this stuff any more. But since working on this I feel like I might be getting my mojo back. Maybe I will reinstall photoshop. Or it could just be the beer talking.
    2623.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    This part is now finished as far as I’m concerned. I might add more if I feel it’s needed.
    2624.jpg
  • publiusrpubliusr550 Posts: 1,746Member
    Good work.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thanks.

    UPDATE...
    Finished up this bit on the side of the station.
    2625.jpg
    Started to work on whatever this part is.
    2626.jpg
    Another full body shot.
    2627.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Got a bunch done yesterday. I finished up this part.
    2628.jpg
    Pretty much every thing on this arm is done now.
    2629.jpg
    2630.jpg
    2631.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    The arm is now done.
    2632.jpg
    I have started to work on the main section. I won’t add too much detail to this part.
    2633.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I added grid lines to this part.
    2634.jpg
    This one is just for fun. I like the angle.
    2635.jpg
  • RaftermanRafterman331 Posts: 0Member
    Hey there XFossboute, mate i am a long time member and i have been in the scifi wilderness again, so i have only just followed this thread in its entirety this afternoon. ..........Firstly, you rock!! Watching your evolution of design to concept to production is most, Most inspiring. Am always astounded by the quality of and quantity of aspiring and practicing artists. Always a fan, yours sincerely....Rafterman.😊😊
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thank you.

    UPDATE...
    Working on ideas for a little more detail.
    2636.jpg
    Was thinking about what to do with this part. I may just end up doing nothing to save myself some time and aggravation.
    2637.jpg
  • StarshipStarship464 São Paulo - BrasilPosts: 1,976Member
    Interesting idea Rob! :thumb:
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thanks.

    UPDATE...
    Last two pictures for the year.
    More detail added to the flip side.
    2638.jpg
    Got some work done to the top.
    2639.jpg
  • kvorshkkvorshk171 Posts: 76Member
    I love watching this progress. Curiosity, how many craft have you designed for this project now?
Sign In or Register to comment.