Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DNot a reboot

2456724

Posts

  • somacruz145somacruz1450 Posts: 0Member
    That's really cool :thumb: If it's the alternative-universe ship then you should add more weapons, torpedo launchers and a big decal for the saucer (the same which NX had)
  • AresiusAresius359 Posts: 4,171Member
    Keep calm, the ship isn't finished yet.
    Still, agreed on these details.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    I do plan on making a version for the normal universe too so I don't plan on doing anything that would result in haveing two models made. I just want to swap out the decals.
    I do plan on haveing a nice big decal on the saucer like the NX-01 had not to mention the yellow decals.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Redid the textures on the warp engine. They're a higher resolution and look much better as far as I'm concerned.
    427.jpg
    428.jpg
    429.jpg
  • MelakMelak332 Posts: 0Member
    Nice! I like those exhaust valves on the neck/pylon, especially with the added dirt! (or whatever they are :))
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thank you. i'm kind of proud of the dirt around the vents.
    UPDATE...
    I've finished the textures for the warp engine, the neck and the impulse engine. I also made a minor change to the deflector housing.
    430.jpg
    431.jpg
    432.jpg
  • Monkey BoyMonkey Boy0 Posts: 0Member
    Any chance you could let that poor bastard on the nacelle - just behind the neck - back inside now?

    A very nice design!
  • shipfishershipfisher371 Posts: 115Member
    Big ups on the deflector housing/mounting spar. Dishes hung down on flimsy stalks were a weak point (visually and probably in terms of dynamics) of the Franz Joseph designs.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Monkey Boy wrote: »
    Any chance you could let that poor bastard on the nacelle - just behind the neck - back inside now?
    Not untill he says he's sorry for the naughty things he's said.:lol:
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    I thought, before I start on the new saucer I'd take a look at what the next ship could look like.
    This ship is the U.S.S. Swiften.
    Under the ship I included the new type 2 warp engine. I decided to add reaction control thrusters.
    444.jpg
    445.jpg
    446.jpg
    Ignore the civil war title. It was a mistake. :p
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Here is another ship.
    The U.S.S. Archer. Many of the shapes are temp.
    447.jpg
    448.jpg
    449.jpg
    450.jpg
  • [Deleted User][Deleted User]2 Posts: 3Member
    U.S.S. Archer

    loosly based on the NX from enterprise?
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Yep.
  • BrickheadBrickhead176 Posts: 0Member
    Yea this is a good one, I know this is going to be bad ass.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I started to add a few things to the saucer. I've added some nav lights. reaction control thrusters and whatever those three window like things are at the front of the saucer.
    451.jpg
    452.jpg
    453.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Well I thought I might as well get back to work.
    I've started on textures for the bridge, I still need to add a little dirt. Those two holes below the bridge are torpedoe launchers.
    495.jpg
    After seeing the new Enterprise I thought I'd make a few changes to the Nav Deflector. I have two options and I haven't decided witch one I like more.
    496.jpg
    497.jpg
  • Road WarriorRoad Warrior206 Posts: 813Member
    Looking good there X.
  • SeverusSeverus401 Posts: 254Member
    I like option 2 for the new dish.
  • CrimsonLineCrimsonLine171 Posts: 0Member
    I'd also vote for option 2 on the deflector.

    I like your alternate designs at the top of the page, as well.
  • FalinFalin0 Posts: 0Member
    I like thenew deflector, what's the purple thing hanging off the saucer?
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Falin wrote: »
    I like thenew deflector, what's the purple thing hanging off the saucer?
    The purple stuff will become the lower nav lights.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Added windows to the B and C deck and phasers. On the back of the B and C deck is the Captains personal quarters/bachanal/harem room.
    498.jpg
    499.jpg
    I also have two pics of what could turn out to be a shuttle.
    500.jpg
    501.jpg
  • TrekologistTrekologist0 Posts: 0Member
    I LOVE the USS Swiften, the two-nacelles w/ saucer! LOVE IT! I'd love to see a 22nd century version of this ship! Love the profile!
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thank you.

    And because the power of J.J. compels me I felt like doing a Kelvin version of the ship. Right now the shapes are just temp to see if it would work.
    502.jpg
    503.jpg
  • ScotchyScotchy171 Posts: 0Member
    :D

    Really digging the looks of these ships mate.
  • LonewriterLonewriter236 Posts: 1,078Member
    at first I didn't like the Kelvin but it is growing on me, keep up the good work.
  • TrekologistTrekologist0 Posts: 0Member
    yes the kelvin definitely has an interesting hull profile,nice work! a suggestion, I would make the hull connector to the deflector pod thinner. either way keep up the good work!
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Like I said before. The shape is just temp. I plan on making it thinner.
  • EBOLIIEBOLII204 Posts: 360Member
    Looking fantastic as always there X........Most excellent
  • bbeltbbelt0 Posts: 0Member
    Also looking foward to seeing this design evolve.

    Are you planning on keeping the traditional phaser banks, or use the turret like phasers seen in the promotional pics?
Sign In or Register to comment.