Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DValkyrie013's Various models and doo dads..

124

Posts

  • ChiefBrexChiefBrex256 North CarolinaPosts: 110Member
    Man, your meshes look great! What's the poly count like on your designs? Making me think I'm being way too conservative with my polies...
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    edited February 2021 #93
    I usually work on a miserable underpowered computer, and mostly for 3d print, so I optimize as often as I can, so a whole ship usually doesn't crack 200,000 poly's Usually quite less. But some detail gets a bit elementary where a person like Mark, or Koi would spend 50,000 polies on a greeble.. :)
    But this one is a beast.. :)
    Post edited by VALKYRIE013 on
  • ChiefBrexChiefBrex256 North CarolinaPosts: 110Member
    Geeeeez. My models pale in comparison then. My DSC/TOS right now is only about 24k - 25k
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    So, a bit of a break from Trek, Was trying to make a sabre class, and a refit voyager, but just kept spinning my wheels on ideas, so went to SW for a break, and found this ship interesting. Sadly theres like maybe 2 pictures, so alot of wiggle room, but I think I kept it true to Star Wars.

    So without adue..

    https://starwars.fandom.com/wiki/S-250_Chela-class_starfighter

    50983310403_73af3675c4_o.jpg
    50984016206_24d3b0aa1f_o.jpg
    50984121747_613143fb54_o.jpg

    Lizzy777wolfmanFreak
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    edited October 2021 #96
    Wow.. 7 months? Need to visit more often.. sheesh.

    Okay, today working on the Alaska Class. Been meaning to do this ship, had a couple of false starts, but after seeing Atolm do his 3 view, I got motivated.

    Now, I'm mostly following the original orthos, but the side, top, front don't match up worth nuthin as many know. So used Atolm's 3 view as a basis to see better.
    So my own "Version" of it. Mostly just feeling out the ship, adding what I think is cool, haven't really touched the front of the engineering hull, so kind of ignore that.
    Put in my Ingram nacelles as a place holder, as the blueprints do have them as it. but will update them in the end.

    So without further Ado.

    51550932792_d17fe76bb0_o.jpg
    51552643730_1c7f071e25_o.jpg
    51550932752_45572ed12b_o.jpg
    51550932732_5cf4c53193_o.jpg
    Post edited by VALKYRIE013 on
    ashleytingerLizzy777BolianAdmiral
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    I had a brain freeze on the Engineering hull of hte Alaska, so switched to another ship I was having a brain freeze on! Woo!

    So since last time, some more detail works, window placements, added a small shuttle bay at the back of the saucer, maybe change that latter. we'll see.

    Doing the engineering hull like the Enterprise E, most stuff is actually the E-E inspired,

    So, without further ado!
    Thanks!

    51579345578_739fe306dc_o.jpg
    51579116656_3617a1b0f3_o.jpg
    51579792339_cbed232d1f_o.jpg
    51578299702_a4d03ba862_o.jpg
    Lizzy777paulbhartzogrojrenRory1707BolianAdmiral
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Some more progress.
    some heres and theres, mainly figuring out lifeboats, phasers, and window placements.

    So without further ado.
    51597731298_5ffa4a24e3_o.jpg
    51597513411_7cf03543bd_o.jpg
    51598177574_7e5016c0d1_o.jpg
    51597513276_aaa2eace41_o.jpg


    srspicerLizzy777raztovrojrenRekkertRory1707
  • paulbhartzogpaulbhartzog184 Posts: 23Member
    That Emmett Till is just sweet. More !
  • publiusrpubliusr320 Posts: 1,458Member
    edited October 2021 #100
    I like the quad nacelles thin and almost touching.

    I could see a larger design with the lower main secondary hull with a deep “chest” and a single shuttlebay connected to the lower nacelle pair…pylons rising up.

    There would be a triangular tertiary hull…wedge shaped with a thin pylon connecting it to the saucer. It has its own bridge atop an All Good Things superphaser in its wedge front…and wide shuttlebay space to the rear. This has pylons that reach down to the upper nacelle pair.

    A Federation Warbird.
    Post edited by publiusr on
  • RekkertRekkert2779 Buenos Aires, ArgentinaPosts: 2,180Member
    I love what you're doing with the Emmett Till design, great interpretation of the concept!
    For my finished Trek bridges and other works of mine, visit my portfolio
    Feel free to contact me if you're interested in commissions!​
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Thanks!

    Few more details, Major change was the pylons, changed the 45 degree straight pylons to curved Ent D ish pylons going into the nacelles.
    I don't like the shuttle bay at the back of the saucer, I mean it has a tail bay, and a front of saucer bay, but I have no idea what to put in that area... Decisions decisions..
    More latter!

    51613518447_91183cfff4_o.jpg
    51615002499_5da1a204bf_o.jpg
    51613518507_7634a1b9e7_o.jpg
    51615223395_6060d98303_o.jpg


    ashleytingerLizzy777Rory1707srspicer
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Switched again, I swear, I see something while surfing the net.. gets me interested in some other ship.. In this case "Ships"

    Started on the Best of Both Worlds graveyard fleet, Done the Cheyenne and the Challenger awhile back, a nebula is somewhere in the pipeline, eventually.

    But today I'm working on the Springfield, the New Orleans, and the Niagara classes!
    All are Works in progress, Started on the New Orleans, and drifted over to the Niagara and Springfield.
    So, will continue with these for abit, till I'm tired I guess.. I'm so fickle lately..
    51672199301_667f0c8a0f_o.jpg
    51673069265_acbcd07c15_o.jpg
    51672440738_692e90482f_o.jpg
    LoopholeLizzy777
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    More work on the New Orleans Class, going to get this one done first.

    Lifeboats, shield grids, shuttle bay done. Need to cut in the windows, and finish the neck and some details.
    Thanks!
    51684730012_682c2b88a9_o.jpg
    51684730052_d9ddc08668_o.jpg
    51686203879_1032b8b552_o.jpg
    Lizzy777Loopholesrspicer
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    More!
    Put in the windows and other details like the torpedo launchers

    Not much left, just to make it printable now!
    Thanks!
    51687851528_02543ccebb_o.jpg
    51686786927_0f14e46ca5_o.jpg
    51687575486_bc3b672061_o.jpg
    51688257359_43f77d5d8f_o.jpg
    Lizzy777Loophole
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    More!
    This time its the Springfield class for BoBw fleet.
    Layed out the shield grid, widows, still some work to be done. I Honestly don't care for the bottom pod, and think it looks better without, but owell, still doing the bottom pod.

    So, more soon! :)
    51703370626_e09ac1d018_o.jpg
    51704258450_a81a4fcb78_o.jpg
    51703370606_ebf60e98b6_o.jpg
    51702574667_f6124a7615_o.jpg
    LoopholeLizzy777
  • count23count23312 Posts: 722Member
    I like the Springifeld without the pod as well myself, you could always make it detachable ;)

    Also, that interesting pod you've got on the back of it, i assume you're going off spec? therpf forum had the actual kitbash pieces identified to put all those together.
    Formerly Nadesico.

    Current Projects:
    Ambassador Class
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Since this was a kitbash, and its naccelles were markers.. I think a bit of "artistic engineering correction" to make it correct to length and number of decks etc.
    So to me, it needed a shuttle bay, torpedo launchers etc. what a ship "needs" Plus just having a hollow pod is just a waste of space.
  • count23count23312 Posts: 722Member
    Makes sense. Might is suggest that the rollerdoor in the top pod does not just have much space to roll up, maybe put a seam in the middle of it so the door opens vertically along the centre line?
    Formerly Nadesico.

    Current Projects:
    Ambassador Class
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    More!
    Actually, there is a whole deck worth of space above the doors, so plenty of space. if it was a "Roller Type" :)
    Though it does need.. something..

    So getting close to done, few thing here and there. but almost there.
    51704687852_b1c5ed2a6b_o.jpg
    51705760458_1446967040_o.jpg
    51705480491_9b2400e432_o.jpg
    51706154504_c74462b37a_o.jpg
    wolfmanLizzy777Loophole
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Another hard left turn!
    Today is the Steamrunner!

    Worked on this ... err... 10 years ago? Since then there are better references, so most of the saucer I redone, but the rest I left as is.
    Looking at the references, the Eaglemoss version is a bit.. wrong. Refs were low quality, so i guess they made there best guess at what was going on. Better than the Completly wrong Starcrafts kit thats out..

    So, without further ado.
    Still have some details to make, rcs thrusters, cut in the windows, few odds and ends.
    51739532835_dd9ebd0cb4_o.jpg
    51738884573_b3df210ced_o.jpg
    51739282489_85734cbda5_o.jpg
    51739282499_6e88a07334_o.jpg
    LoopholeLizzy777McCHunter G
  • BolianAdmiralBolianAdmiral851 Torrance, CaliforniaPosts: 2,298Member
    Nice to see another Alaska in the works.
  • gregthefreakgregthefreak0 Posts: 1Member
    edited December 2021 #113

    Deleted coz its rude, apparently
    Post edited by gregthefreak on
  • GuerrillaGuerrilla709 HelsinkiPosts: 2,788Administrator
    Hi @gregthefreak! Welcome to Scifi-Meshes. :)

    Just a couple of quick notes: Asking for people's models in their threads is against the Community Guidelines here. Not a massive faux pas, and you're new here, but I recommend you take a look at them here, when you get a chance.

    The rule is not there because we're jerks or elitist or anything (I mean, I might be, but that's unrelated :tongue:), rather it's there let the artists on the site to work on and post their stuff in peace without having to worry about managing (sometimes constant) requests for their hard work. A lot of things end up released, some things don't, but it's always up to the artist and not something they should have to deal with just for posting their work here.

    Also, hijacking someone's thread with other people's work can come across a little rude. We have a whole dedicated forum for making requests.
    Comco: i entered it manually in the back end
    Join our fancy Discord Server!
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Something new, Atolm design inspired, a "Single" engine patrol ship, I'm thnking 2370 ish, Some voyager influences, mostly Tng elements.

    So, Have a question, the Atolm design had the Warp engine on the bottom, but decided to see if it looks better elsewhere, on the upper, or on the traditional side. Now I could just be a variant of the same class,

    Now to add an extra wiggle, the "single" engine is actually a Dual engine with a common bussard. So the side mounted is a 4 engine variant.. he he

    So, just keeping on with this, and asking for input on what ya'll like in the engine mount!

    51800325346_f637741b59_o.jpg
    51800432803_f276b60de7_o.jpg
    51799365182_aefcf283f3_o.jpg
    51799365177_50f8f39889_o.jpg
    Lizzy777Loophole
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Some more work,
    Went with the under slung nacelle, and the 2 side variant. Not much difference, some of the Armour panels.

    Went an Enterprise E type of paneling instead of the shield grid varinet, I think it looks good.

    Not much left, just cut in the windows, some detailing then I'm done!
    51819282421_34f90d74c4_o.jpg
    51819624379_0d47f656da_o.jpg
    Lizzy777LoopholeHunter G
  • NevetsNevets192 EarthPosts: 121Member
    Personally I like the "four" engine variant.

    Just a thought: It could a two engine version where the nacelles either open up before it jumps to warp, or when it exits warp they open up to cool down. (Would be a nice visual element). :)
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Would look interesting , but i personally despise moving parts to go to warp. More parts, easier to break. If said moving part brakes.. no warp.. Thanks for the idea though!

    So, Done building this, may color it latter.
    put in the rest of the windows, water tighted it for printing.
    So, something different next!

    51823366766_ee35f044c6_o.jpg
    51823705289_b3959049c6_o.jpg
    51822416947_9c8a620e3d_o.jpg
    51823366781_b6f7d362b1_o.jpg
    Hunter GLizzy777
  • VALKYRIE013VALKYRIE013518 Posts: 1,465Member
    Something.. Different..
    Was looking up stuff to make, and came aross stuff for the Final Frontier animated series that wasn't meant to be. Took a bit of interest in the enterprise concept.. So decided to have a go at the ship.
    Its... uh.. going..
    I'll tool around on this for abit to see if I come up with anything interesting :)
    So more soon!.
    51834211622_2120906aed_o.jpg
    51835271833_665a2915ff_o.jpg
    51835892020_2c594fbd2b_o.jpg
    51834211627_cdaf6c87b5_o.jpg

    Lizzy777
  • LoopholeLoophole32 Posts: 51Member
    It has a certain ugly beauty to it. Would be interesting to see it fully fleshed-out.
    Standing among giants
  • admiral hortonadmiral horton192 Posts: 127Member
    r u going to add textures to the models?
Sign In or Register to comment.