Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DU.S.S. Salcombe - Star Trek Beyond

13»

Posts

  • Warp Propulsion LaboratoryWarp Propulsion Laboratory818 BrooklynPosts: 260Member
    I think so too. :)
    Please visit my YouTube channel!
    https://www.youtube.com/channel/UCqRhLEHgwgTKxsalM5YznYQ


    Formerly furswift
  • evil_genius_180evil_genius_1801854 Posts: 9,999Member
    Wow. It's a lot of work to make those all blend like that, but it looks fantastic.
  • shipfishershipfisher177 Posts: 82Member
    The shape of the nacelles is looking more contemporary with the Ent A. That fits my assumption that the Salcombe isn't long past launch either - maybe back into dock for post shakedown checks.

    Your hard work keeps paying off :)
  • PixelMagicPixelMagic408 Posts: 651Member
    shipfisher wrote: »
    The shape of the nacelles is looking more contemporary with the Ent A. That fits my assumption that the Salcombe isn't long past launch either - maybe back into dock for post shakedown checks.

    Your hard work keeps paying off :)

    Well, they will literally be the exact same nacelles as the Ent A. Just like in the movie.
  • evil_genius_180evil_genius_1801854 Posts: 9,999Member
    edited February 2020 #66
    shipfisher wrote: »
    The shape of the nacelles is looking more contemporary with the Ent A. That fits my assumption that the Salcombe isn't long past launch either - maybe back into dock for post shakedown checks.

    Or maybe construction on it was being completed as the Enterprise-A was being constructed. I'd imagine building a starship would be like a building, you finish the exterior and then the interior. In fact, it makes even more sense with starships, so you can pressurize the interior.
    Post edited by evil_genius_180 on
  • PixelMagicPixelMagic408 Posts: 651Member
    Well, as I draw to a stopping point for the weekend, I have completed modeling the entire upper side of the Salcombe except for the nacelles.

    u4QlmXZ.jpg
    5ELjfKe.jpg
    FXHGnSf.jpg

    Rekkertevil_genius_180FreakMadKoiFishashleytingerkomaroBrandenbergBolianAdmiralwolfmanpubliusrand 1 other.
  • trekkitrekki507 Posts: 1,071Member
    This Mesh ist fantastic👍
  • BrandenbergBrandenberg1562 CaliforniaPosts: 1,877Member
    Great model. Fine work.
  • evil_genius_180evil_genius_1801854 Posts: 9,999Member
    The more you work on this ship, the more I'm loving the design. I'm glad you're doing this and giving us a real look at this ship.
  • shipfishershipfisher177 Posts: 82Member
    On my wish list for a 4th Kelvinverse movie was seeing more of ships like this, especially this one. You have well and truly scratched that itch expertly with this wonderful rendition of it. So if the Chris's (Pine & Hemsworth) wanted more dosh than projected revenues justified to do #4, then thanks to you, I'm good B)
  • TrekMDTrekMD191 Posts: 635Member
    Love how this is coming along.
  • trekkitrekki507 Posts: 1,071Member
    Is the ship ready? Or are you still building there?
    I like this ship.
  • PixelMagicPixelMagic408 Posts: 651Member
    trekki wrote: »
    Is the ship ready? Or are you still building there?
    I like this ship.

    The ship has not been finished. I got severe burnout on modeling, so I took a little break. I am however, still working on the project it goes in, so in the near future, I'll have to swing around and finish her up. :)
    LoopholeP5ych0p4thLizzy777
  • froggi3froggi3334 Posts: 24Member
    Very nice
  • trekkitrekki507 Posts: 1,071Member
    Burnout is not that nice. Hopefully you'll be better soon. I'm looking forward to this ship.
  • Hunter GHunter G484 Posts: 384Member
    Well this was an unexpected yet pleasant find. great job so far!
  • shipfishershipfisher177 Posts: 82Member
    Finishing this beauty is almost a side issue now. I'm just glad to see you posting PM. Means no '19 paying you a visit. Keep safe and well mate.
  • PixelMagicPixelMagic408 Posts: 651Member
    edited October 3 #79
    Blast from the past. I finished this now. May I present...the U.S.S. Salcombe.

    vdl1ymt.jpg
    i29GFh1.jpg
    3K9rN9P.jpg
    5ZOe6qL.jpg
    g9xOLJ3.jpg
    pYJqHsp.jpg
    hGdFNq7.jpg
    VWSkLTS.jpg
    DAWXgAP.jpg
    5kSjfbk.jpg
    RmpE9lO.jpg
    Post edited by PixelMagic on
    McCRekkertLoopholeWarp Propulsion LaboratoryBolianAdmiralLizzy777ashleytingerlewisnivenLeoBerlin
  • trekkitrekki507 Posts: 1,071Member
    Very nice, good object. I had already given up hope.
    Nice 👍😎
  • trekkitrekki507 Posts: 1,071Member
    Can you please create a four page view.
    If possible in 4k.
  • PixelMagicPixelMagic408 Posts: 651Member
    trekki wrote: »
    Can you please create a four page view.
    If possible in 4k.

    I am releasing the mesh later this week, and I will do orthographics then. I assume that's what you mean by "four page view."
  • trekkitrekki507 Posts: 1,071Member
    Yes, thanks.
  • lewisnivenlewisniven1879 UKPosts: 389Member
    Fine work, love it B)
    1701dproject.blogspot.com
  • VALKYRIE013VALKYRIE013454 Posts: 1,447Member
    Beautiful!
    Fantastic job you done with her. and the renders look movie quality. Doing good work!
  • PixelMagicPixelMagic408 Posts: 651Member
    edited October 9 #86
    𝗗𝗢𝗪𝗡𝗟𝗢𝗔𝗗 𝟯𝗗 𝗠𝗢𝗗𝗘𝗟 - U.S.S. Salcombe (Kelvin Timeline)

    For materials to work properly, Diffuse maps should be read in as 2.2 gamma. All Roughness materials should be read in as 1.0 gamma. This will ensure proper rendering using PBR shaders.

    Formats...

    3ds Max 2017 / Vray 5 - Native format
    3ds Max 2017 Standard Scanline
    FBX
    OBJ

    Enjoy!

    3ds MAX VRAY VERSION
    https://drive.google.com/file/d/1pIPXIOdVM--_WMvifMwoCnA31L3WxVF5/view?usp=sharing

    3ds MAX STANDARD VERSION
    https://drive.google.com/file/d/1F6oY4V9c8YCH07a_yRiWwfuhk9lbJJO6/view?usp=sharing

    FBX VERSION
    https://drive.google.com/file/d/19PITaVPl7SOPjuehCU2fXtYOwSbccd0l/view?usp=sharing

    OBJ VERSION
    https://drive.google.com/file/d/1ZZdwQdFZL50uDk1J-H3kmP3uQzYwq5FI/view?usp=sharing

    cF3D04l.jpg
    5HWW4b6.jpg
    bZ6kjYJ.jpg
    tgRFoUy.jpg
    LzcrIUV.jpg






    Post edited by PixelMagic on
    McCLizzy777trekkiashleytingerMadKoiFish
  • trekkitrekki507 Posts: 1,071Member
    Wow, very nice. Thank you for a new nice ship. 👍😊
  • VALKYRIE013VALKYRIE013454 Posts: 1,447Member
    Many thanks!
    If I use it in anything will let you know, very generous!
    Good luck in your undertaking!
    PixelMagic
Sign In or Register to comment.