Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DWarp Fighter and other ships

12345679»

Posts

  • BolianAdmiralBolianAdmiral1114 Torrance, CaliforniaPosts: 2,560Member
    I love those ramscoops, lol.
  • kadenkaden799 JapanPosts: 219Member
    jqkgt1gbrauv.png

    Rooms are there but not that good, I threw together a wall and floor to use as an image, I want to have a few different types of rooms in the end.
    RekkertLizzy777publiusrsrspicerJEScommandersozoAel'sMustang13Camaro68
  • publiusrpubliusr550 Posts: 1,746Member
    I can almost see that sliding off the forward section of a larger ship...
  • kadenkaden799 JapanPosts: 219Member
    2ap1qb0acdyj.png

    Still a few things to do on the hull. And more details.
    I want to cut the panel up forward of the phaser. It is looking a little big.
    srspicerBolianAdmiralLizzy777lewisnivenJEScommandersozoAel'sMustang13Camaro68
  • BarricadeBarricade198 Posts: 180Member
    Kaden, if you're still working on the fighter, I have a possible idea for you. Angle the ICARS 'strip' in front of the HOTAS controls, down a bit further. That way the pilot could simply move their arm/hand straight from either the throttle or stick, straight forwards to touch the controls. The way you have it now, they'd have to completely lift their arm/hand clear of the HOTAS in order to touch the controls like they were a keyboard 'above' the HOTAS. This came to me after getting my first piloting lesson, and then getting to sit in one of the jets at the Boeing Field museum, and how so many control are flat to the pilot, and within very rapid reach. Its one of those 'quicker you can touch something and get your hands back on the controls, the longer you'll live' types of things. Another minor possibility is just having the middle section stay as is, while only the two sections on either end of the ICARS strip be able to swing down.
  • kadenkaden799 JapanPosts: 219Member
    edited May 2021 #247
    Funny you should mention the cockpit of the fighter, because I was recently thinking about changing it up. For example breaking the main panel into two and the top panel into 3, and re building the front section. Will take your comment into consideration! Thanks. =)

    Post edited by kaden on
  • BrandenbergBrandenberg1655 CaliforniaPosts: 1,937Member
    More fine work from the Kaden! :3
  • TrekMDTrekMD192 Posts: 639Member
    Cool design!
  • JESJES390 Posts: 194Member
    I don't know why you chose blue for the impulse drives...but I hope you keep it.
    kaden
  • kadenkaden799 JapanPosts: 219Member
    edited June 2021 #251
    24hbmi6sbvwi.png
    vegqxbxrcj64.png

    yup keeping the blue engines.

    I think I am done modelling, I just need to add the name and registration to the underside and the nacelles.
    Next is textures... hopefully it will turn out ok.
    Post edited by kaden on
    LeoBerlincommandersozoLizzy777BolianAdmiralJESFreakpaulbhartzogAel'swibbleRekkertand 1 other.
  • BlueNeumannBlueNeumann615 Posts: 1,275Member
    I really like that underside!
  • NevetsNevets201 EarthPosts: 134Member
    Nice.

    For some reason when I see the ventral view I also imagine another pair of warp engines on top, or a roll bar. Perhaps a variation in the class.
  • JESJES390 Posts: 194Member
    Speaking of variants, I know that you said that these only have warp drives, but I'm under the impression that the Mulciber and Merian classes started out the same way, but were modified.

    I could definitely see a variant of this with a pointy bow (think Rhode Island refit for the Nova class), which appears to be one of those design elements necessary to make QSD work.
  • Ael'sAel's87 FrancePosts: 69Member
    kaden wrote: »
    24hbmi6sbvwi.png
    vegqxbxrcj64.png

    I'm late for it but wanted to say that it's a pure beauty !
    kadenHunter GLeoBerlinrojrenSoul Scream
    AW Fanon Wiki — — — DeviantArt — — — AW Discord (EN)
  • kadenkaden799 JapanPosts: 219Member
    Ael's wrote: »
    I'm late for it but wanted to say that it's a pure beauty !

    Thanks, I am very slowly trying to texture it and the fighter.
    I hope I will have them finished before too long.

    Soul ScreamAel's
  • Hunter GHunter G1905 Posts: 543Member
    That's a nice little ship, nicely done!
    kaden
  • kadenkaden799 JapanPosts: 219Member
    Thanks Hunter. I need to get motivated to finish!

    I have also been playing with 3d printing and made a quick badge to print.
    ksximenntv8j.png
    So far after one pass of putty, primer and sanding.
    ny20zxpco4i1.png

    Ael'sBolianAdmiraldarkthunderLizzy777LeoBerlinrojrenSoul Screamashleytinger
  • Captain AdamCaptain Adam115 Posts: 15Member
    Nice work.
Sign In or Register to comment.