Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DStar Trek Interiors

1103104105106107109»

Posts

  • RekkertRekkert2419 Buenos Aires, ArgentinaPosts: 2,125Member
    I've been working mostly on the transporter pad itself, finishing its top piece and further working on the aft wall. The ceiling piece is based on what little screencaps of the area on the Defiant there are, though I had to improvise on some of the elements. The lit yellow pattern on the aft wall is inspired on the Enterprise-E design, but incorporating more horizontal elements given the shape of the piece. I still got to add some fabric elements lower on the wall.

    On the control booth area, I've changed the shapes somewhat and smoothed out the edges around the arches, plus I swapped the material for the darker metallic brown that was already present in the ceiling, leaving only the side walls in the lighter tone. I still have to come up with a design for the front end of the control stand, right now it's a big, boring empty half-wall in the middle of the room.

    tadeo-d-oria-c0-01.jpg?1618338979
    tadeo-d-oria-c0-03.jpg?1618338987
    BolianAdmiralDoctorShmullusLizzy777Captain SerekRory1707
    For my finished Trek bridges and other works of mine, visit my portfolio
    Feel free to contact me if you're interested in commissions!​
  • BolianAdmiralBolianAdmiral744 Torrance, CaliforniaPosts: 2,141Member
    I really love this.
    Rekkert
  • DoctorShmullusDoctorShmullus21 Posts: 9Member
    This is really turning out fantastic. I love how you’re mixing styles from what we’re already familiar with but still retaining an independent feel to it. I can hardly wait for the end result!
    Rekkert
  • Rory1707Rory170758 Posts: 67Member
    I love this transporter room. Can’t wait to see the final renders! 🖖🏾
    Rekkert
  • darkthunderdarkthunder201 SwedenPosts: 66Member
    Okay, suggestion time...

    For the control "booth", remove the two pillars on the side of the transporter console.
    Reverse the circle shape, and make it follow the curve of the two steps you have for the platform.
    Keep the top of the console largely the same but widen it about the width between the now removed pillars.
    Add a new free-standing "bottom" half for the console that follows the shape of the now curved platform.

    Really poor MS Paint edit attached 😆

    gwibytb5dfho.png
    RekkertCaptain Serek
  • Rusty0918Rusty0918245 Posts: 431Member
    @darkthunder - Well, it's Rekkert's call on this one, he can do it as he wishes.
  • darkthunderdarkthunder201 SwedenPosts: 66Member
    edited April 14 #3248
    Rusty0918 wrote: »
    @darkthunder - Well, it's Rekkert's call on this one, he can do it as he wishes.
    Might want to re-read my post?

    "Okay, suggestion time..."

    Never said he must do it according to my above edit. Of course he does it however he see's fit. It was merely... a suggestion!
    Post edited by darkthunder on
    seanrRekkert
  • seanrseanr895 Brooklyn, NYPosts: 533Member
    Looking good, Rekkert. I agree with part of darkthunder's suggestion - flipping the curvature of the knee wall and console - but I'd leave the posts intact. If you wanted to go a little retro, you could add curved glass between the posts, reminiscent of the booth in TMP/TWOK or TUC.
    Rekkert
  • RekkertRekkert2419 Buenos Aires, ArgentinaPosts: 2,125Member
    Thanks for all the comments! We're nearly done with this room, and I'm glad it's being so liked. :D

    @darkthunder: Thanks for the suggestion! I thought about doing it that way, more Voyager-style; but precisely because of the similarities with that other transporter room I wanted to do things differently and not to mimic it. Also, I kinda prefer to have this half-wall following the same curvature of the wall behind it, seems like a better use of the space IMO, as it leaves more space in the middle of the room, which is more important given the size here.

    @seanr: Thanks! I did briefly have a glass panel in there between the posts (alongside the glass LCARS behind it), but between that, the metal handrail and the half-wall, it looked a bit too busy and I ended up removing it.

    Thanks to some new references @Nayslayer sent my way, I redid the whole top of the transporter pad to be more accurate. I also changed the color of some of the lighting to blue, simply because I think it looks better and matches the lights on the pad itself.

    As for the half-wall, I ended up going with a rather simple metallic panel down the middle, identical to what I did for the similar wall around the warp core on the engineering set. I repeated the same thing on the other side of the wall.

    tadeo-d-oria-c0-03.jpg?1618415280
    tadeo-d-oria-c0-02.jpg?1618415269
    Captain SerekBolianAdmiralashleytingerLizzy777DoctorShmullusRory1707
    For my finished Trek bridges and other works of mine, visit my portfolio
    Feel free to contact me if you're interested in commissions!​
  • Captain SerekCaptain Serek231 Burbank CaliforniaPosts: 62Member
    Very nice progress.
    Rekkert
    I've come a long way for the power of Genesis and what do I find? A Square Pegs reject, another actress playing Saavik and Leonard Nimoy's stand-in.
  • darkthunderdarkthunder201 SwedenPosts: 66Member
    Rekkert wrote: »
    Thanks for all the comments! We're nearly done with this room, and I'm glad it's being so liked. :D

    Thanks for the suggestion! I thought about doing it that way, more Voyager-style; but precisely because of the similarities with that other transporter room I wanted to do things differently and not to mimic it. Also, I kinda prefer to have this half-wall following the same curvature of the wall behind it, seems like a better use of the space IMO, as it leaves more space in the middle of the room, which is more important given the size here.

    Sounds like overall a good plan. Just throwing out my 2 cents. Think what you're doing so far has been amazing to watch 😁
    Rekkert
  • FANGsFANGs212 Posts: 77Member
    This really looks fantastic!
    What is the height of the access interface below the isolinear chip hub?)
    Just noticed, that it's facing downward

    RekkertRory1707
  • RekkertRekkert2419 Buenos Aires, ArgentinaPosts: 2,125Member
    @Captain Serek: Thanks! :)

    @darkthunder: And I appreciate those 2 cents! I wouldn't be posting WIPs here if I wasn't open to suggestions and criticism. :D

    @FANGs: Thanks! The height is about 1.6m. The panel is based on a similar (but not identical) design found in the Enterprise-E jefferies junction, which was also used on the USS Righteous in ST:Borg. You can see that it's placed even lower there.
    tadeo-d-oria-screenshot-from-2021-04-15-21-45-17.jpg?1618533999
    tadeo-d-oria-screenshot-from-2021-04-15-21-41-51.jpg?1618533993

    I've added the final touches to the transporter area, with the fabric panels near the bottom now in place. I didn't want to reuse the same pattern these had on the Defiant, as those were made to mirror the similar patterns elsewhere on the ship. So I went with a design that's reminiscent of the fabric patterns on the bridge, but vertical instead of horizontal. These are also much flatter than the ones on the Defiant, again to better mirror the rest of the Ent-E inspired aesthetic.

    So I think the room's finished now! I've experimented with some further tweaks, such as adding those lit translucent elements between the aft wall panels that the Voyager/Ent-E transporter had, but given that there's only room for two of them here, they didn't look good IMO.

    tadeo-d-oria-c1-02.jpg?1618533201
    ashleytingermdtaBolianAdmiralLizzy777MadKoiFishDoctorShmullusRory1707
    For my finished Trek bridges and other works of mine, visit my portfolio
    Feel free to contact me if you're interested in commissions!​
  • DoctorShmullusDoctorShmullus21 Posts: 9Member
    The transporter piece is simply phenomenal, one of my favorites. Fantastic work Rekkert, you’ve done it again!
    Rekkert
  • RekkertRekkert2419 Buenos Aires, ArgentinaPosts: 2,125Member
    @DoctorShmullus: Thank you very much, I'm glad you think so haha! :blush:

    And here are all the finished renders, enjoy!
    tadeo-d-oria-c1-01.jpg?1618541722
    tadeo-d-oria-c2-01.jpg?1618542972
    tadeo-d-oria-c3-01.jpg?1618542981
    tadeo-d-oria-c4-01.jpg?1618542989
    tadeo-d-oria-c5-01.jpg?1618542998
    tadeo-d-oria-c6-01.jpg?1618543006
    tadeo-d-oria-uss-yeager-transporter-room-cutaway.jpg?1618559918
    ashleytingerLizzy777Captain SerekWarp Propulsion LaboratoryDoctorShmullusTenaciousMCBolianAdmiralJMP11Rory1707
    For my finished Trek bridges and other works of mine, visit my portfolio
    Feel free to contact me if you're interested in commissions!​
  • ashleytingerashleytinger797 Central OhioPosts: 755Member
    I love the blue on that. Gives it a nice little pop. Great work!
  • lennier1lennier1441 Posts: 1,153Member
    Great upgrade of the Defiant transporter alcove designs!
  • Captain SerekCaptain Serek231 Burbank CaliforniaPosts: 62Member
    Excellent work as always.
    I've come a long way for the power of Genesis and what do I find? A Square Pegs reject, another actress playing Saavik and Leonard Nimoy's stand-in.
  • Rory1707Rory170758 Posts: 67Member
    @Rekkert every render you create gets better and better. I love this transporter room. I need a larger version for the Endeavour when you have the time! 🖖🏾
  • richiewilchrichiewilch33 Posts: 21Member
    Really like this set design. As always, a great job.
Sign In or Register to comment.