I've been super busy with work the past few weeks, but things settled down a bit the past few days and I decided to get back into this project. Another new one you ask. Not really, I started working on this a couple of years ago, but I always felt things were off. I've recently got some new reference images that helped me nail the proportions much better. And that's what I'm focused on right now, getting proportions and sizes as close as possible. I'm also trying to fit things in a sensible deck plan. Here's what I have so far:
If there's one thing I'll never complain about it's seeing more Excelsiors around, great work here! You're amassing quite the TMP era fleet!
Thanks! I loved that shuttle bay you did. I might still some ideas from there Also, I like doing TMP cause I feel like not many people do for some reason. Anyway, the plan is to do all the Enterprises so this has to get done
BTW, Sean gave a great suggestion on these strips. Might tweak and change, but it's a nice improvement without messing with the original intent.
Nice to see the grooves in the edge. The studio model just had 3 painted lines.
Whenever I see a change to improve on the original, I take it. To be clear though, these ships are so well made already that there isn't much to change. This was a good spot to do so though.
I'd be very interested to know if you see any areas I could improve the general shape of the ship. You seem to have done a lot of research into this ship.
If I ever attempt this ship again, this is probably the approach I'll take to that sacer rim detailing:
TBH, though, it's all open to interpretation anyway, they never got close enough to that part of the ship to necessitate a detailed close-up model, so who knows what it "really" looks like?
...TBH, though, it's all open to interpretation anyway, they never got close enough to that part of the ship to necessitate a detailed close-up model, so who knows what it "really" looks like?
True. The great thing about building CG models like this is we can reach an arbitrarily high level of detail and fill in some blanks that weren't possible/practical to fill on the physical miniature.
Yeah this has me thinking about that close up hero model of the refits neck and torp housing. All those little warning stickers and bits of gundam and macross decals sheets.
Slow progress this week, mostly because I'm still going back sometimes and reworking proportions of a few objects. But I'm starting to tighten things up. I was hoping to start on details this weekend, but I want to make sure some parts are good to go first. Anyway, a lot of adjustments on the saucer, which you probably won't notice, and then redid the entire pylon assembly, adjust the shape of the impulse engines and added the navigation dome.
Rebuilt engineering 3 or 4 times today. I think I finally got it to a place where it matches what we see on screen, while also keep the surface as smooth as possible. Also started on the attachment for the Refit.
Spent the past few days trying to get the deflector right. Hopefully this is final. I want to get to the actual detailing, but I know there's more to adjust here.
As a casual observer, this already looks amazing. But as someone working on their own starship, I completely understand the desire to nail down those tiny adjustments!
Thanks Unfortunately, I think I'll have to halt the project. I made a few mistakes which will require a rebuild from scratch and I'm not in the mood for that right now. Will probably move back to one of the other stuff I have happening.
what mistakes?? i understand if you don't want to talk about it
It's fine. I messed up on the length of the nacelles and that throws off all the other parts. I also made a mistake on the height of the engineering section, that one isn't so bad, but the first one means all my measurements for the saucer were wrong.
First of all I'd probably say that nobody else would have noticed that.... then id have said something like dont get so bogged down in the minute details... then id have realised that I'm the guy that's got 87 versions of a ship that I've been modeling on and off for 8 years now and is comprised of 6 pieces... so I totally understand where you're coming from.
I'll just end by saying I think your model was beautiful.. the geometry and the renders.. and I hope you get back to her someday..
So, time to get back to this one. Over the past couple of years I've worked on this on and off trying to get proportions right and I think I'm finally at a place where I'm happy. Still some things to adjust as more reference showed up, but nothing major. Anyway, renders!
Posts
Frequent updates at our Discord channel!
Frequent updates at our Discord channel!
Thanks! I loved that shuttle bay you did. I might still some ideas from there Also, I like doing TMP cause I feel like not many people do for some reason. Anyway, the plan is to do all the Enterprises so this has to get done
BTW, Sean gave a great suggestion on these strips. Might tweak and change, but it's a nice improvement without messing with the original intent.
Frequent updates at our Discord channel!
Whenever I see a change to improve on the original, I take it. To be clear though, these ships are so well made already that there isn't much to change. This was a good spot to do so though.
I'd be very interested to know if you see any areas I could improve the general shape of the ship. You seem to have done a lot of research into this ship.
Frequent updates at our Discord channel!
TBH, though, it's all open to interpretation anyway, they never got close enough to that part of the ship to necessitate a detailed close-up model, so who knows what it "really" looks like?
Looking forward to seeing how this turns out!
https://www.youtube.com/channel/UCqRhLEHgwgTKxsalM5YznYQ
Formerly furswift
Frequent updates at our Discord channel!
Frequent updates at our Discord channel!
Frequent updates at our Discord channel!
Frequent updates at our Discord channel!
Frequent updates at our Discord channel!
Ouch. Really sorry man. I've been there a few times...
It's fine. I messed up on the length of the nacelles and that throws off all the other parts. I also made a mistake on the height of the engineering section, that one isn't so bad, but the first one means all my measurements for the saucer were wrong.
Frequent updates at our Discord channel!
I'll just end by saying I think your model was beautiful.. the geometry and the renders.. and I hope you get back to her someday..
Frequent updates at our Discord channel!