Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

Greetings!

Welcome to the fancy new Scifi-Meshes.com! You old username and password should work. If not, get in touch with staff either here, on Facebook or on Discord.

For a quick summary on what's new, check out this thread.
You should also check out the Community Guidelines here.
You can check out most recent posts here or by clicking the handy links on the top menu or the sidebar.

You can dismiss this message by clicking the little X in the top right corner.

3DDerelict ships

1474850525355

Posts

  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    edited March 2019 #1472
    Added a couple of airlocks, and a few other things.

    build0226a-thumb.jpg build0226a1-thumb.jpg
    Post edited by rojren on
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    I need to find a ship to work on that I'm actually interested in. It's been a while.

    This one's really busy on the bottom and a bit spartan on top.

    build0227a-thumb.jpg build0227a1-thumb.jpg build0227a3-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Something about this one looks familiar. But I can't place it at the moment.

    Tag: 0000 000038-0004417
    Type: Defender
    Status: decommisioned
    Location: Chapparal Enclave
    (Orion 001.31-22107.90)
    Culture: Accede
    Est. Age: 12 million years
    Size: 1895 meters
    Nickname: Thunderhead



    build0302x-thumb.jpg
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Worked on the drives.

    build0304-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Working on the aft section.

    build0306x-thumb.jpg build0306x1-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Working my way forward.

    build0310a1-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Added some weapons.

    build0312x-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Done.

    build0313a1-thumb.jpg build0313a2-thumb.jpg build0313a3-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    edited March 2019 #1480
    we38kkf55z2v.png


    https://photos.app.goo.gl/PafyyGP22a7ExnYp9


    I drew this back in the early 80's. Not too long after I first learned drafting. I think I posted it here several years back to show how it was related to another ship I was drawing. So, I guess it's time to find out what it looks like in 3D.

    Post edited by rojren on
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    edited March 2019 #1481
    Started on a cannon emplacement.

    cannon0321-thumb.jpg

    Post edited by rojren on
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    edited March 2019 #1482
    This is the main scanner tower.

    tower0322-thumb.jpg

    Post edited by rojren on
    Lizzy777Coolhand
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    edited March 2019 #1483
    This is going to take a while. Moving down into the body of the ship.

    build0324-thumb.jpg


    Post edited by rojren on
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Added some framework, and a few other things.

    Okay. the links may or may not have a thumbnail attached. I need to either pay $80/year to GoDaddy for an SSL certificate, or change to a different host and get a free one. So, either spend a strangely large money to them or get off my lazy ass and do something I should have taken care of a long time ago.

    build0327x-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Added some innards.

    build0402x-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Cropped back places where I built too far, added the main gun and worked on the hangar complex. (The sensor tower layers are turned off)

    build0406xx-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Worked on the hangar decks, fuel storage, weapons placement, etc.

    build0409c-thumb.jpg build0409c1-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Added some details.

    build0411-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Somewhere around midpoint.

    build0417x-thumb.jpg build0417x1-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Still waiting for Host Gator to do something, so I can replace these links with thumbnails again.


    build0423a-thumb.jpg build0423a1-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • publiusrpubliusr243 Posts: 1,221Member
    I like how you pack a lot of different shapes together. I'd like to see your take on an asteroid ship--the best example of which was the Space Academy
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    I think the rock part of the bases would be difficult.

    I remember seeing an episode or two of that when it originally aired. I thought the buildings on the asteroid looked like assorted coffee making appliances. And Jonathan Harris with a cape and disco hair... Yikes.

    Okay, I went and watched the first episode on Youtube. Terrible, terrible. I'll have to watch some more.
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Fixed the problem with the thumbnails.

    build0508a-thumb.jpg build0508a1-thumb.jpg
    Lizzy777Guerrilla
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Slowly working toward the aft end.

    build0514-thumb.jpg
    Lizzy777Brandenberg
    www.CADWrangler.com
  • BrandenbergBrandenberg1198 CaliforniaPosts: 1,639Member
    I'm looking and I'm liking.
    It never ceases to amaze me, the interesting and clever designs people come up with.
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Thanks.

    I chalk up a lot of my designs to 'happy accidents'. Scribbled shapes that catch my eye, and software that doesn't work as expected.
    www.CADWrangler.com
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Almost there.

    build0520-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • Lee80Lee80192 Posts: 458Member
    Nice design, I like what i'm seeing.
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Thank you.

    Jeeze, it's been two months since I started this. . I don't know that I ever worked on one of these for two months.

    build0522-thumb.jpg build0522a-thumb.jpg
    Lizzy777
    www.CADWrangler.com
  • Lizzy777Lizzy777353 PNWPosts: 489Member
    rojren wrote: »
    Thank you.

    Jeeze, it's been two months since I started this. . I don't know that I ever worked on one of these for two months.

    Sometimes they take as long as they take. The fun jobs are the ones with a deadline that seems to keep changing. And then suddenly you're in crunch time.
    "Cry 'Havoc!,' and let slip the corgies of war!"
  • rojrenrojren450 Louisville, Kentucky USAPosts: 1,556Member
    Yeah. It's just that I've never done a ship this extensive before. It was the largest I ever drafted by hand, as well as the largest in CAD.

    I make these things for me, to keep boredom at bay, so there's no deadlines. Most of my deadlines at work are like they need a drawing in 8-10 business hours, and It's done in 15-20 minutes. Pretty low stress.



    build0527-thumb.jpg build0527a-thumb.jpg
    Lizzy777
    www.CADWrangler.com
Sign In or Register to comment.