UPDATE...
I haven’t done any work for most of the month because I just haven’t felt up to it but I thought I’d try a little.
Mostly I just cleaned up a few details but I also added phaser strips to the bottom of the ship and an warp engine ejection port. I also noticed a few issues with smoothing groups.
UPDATE...
This damn daylight saving crap has been beating the crap out of me so this might be my last post awhile till I readjust again. Anyway got some work done on the aft end of the ship. Happy with it for the most part.
UPDATE...
Added a bit more detail. Not getting much done really because I’m looking for work and it’s not easy since I haven’t done it since I was a kid. Crippling self doubt isn’t helping me any.
UPDATE...
Got frustrated working on the last ship so I thought I’d move to another one. I’ve done two pics showing the full ship just to get a good look at it. Most of the work on the top of the hull is done.
UPDATE...
I added detail to the fantail. I’m happy with it but I think I might rebuild the section because I’m not happy with the segmenting and a few other issues I’m coming up against. Feel like I might need a small break.
UPDATE...
Damn tore up my left knee again while I was asleep again. Well I pretty much finished up the fantail. I also redesigned the tractor beam emitter. I added two new transporter emitters and added some grid lines to the bottom of the primary hull. I’m gonna need to adjust those. They’re a little deeper and thicker than I want them.
UPDATE...
Well looks like with a little help from the Autodesk forums I was able to fix the problem I was having so back to work I go.
Added some detail and a few more windows.
The windows and whatnot are looking great. I don't remember if I ever mentioned it before, but I like the deflector and cutout on this ship. Sorry to hear the weather is getting you down. Unfortunately, this is one of the times of year for those more severe temperature changes.
Posts
I haven’t done any work for most of the month because I just haven’t felt up to it but I thought I’d try a little.
Mostly I just cleaned up a few details but I also added phaser strips to the bottom of the ship and an warp engine ejection port. I also noticed a few issues with smoothing groups.
Back to work on the Sagan. Mostly just cleaning a few things up and adding detail to the warp engine.
More work done to the warp engine. If I can get this part knocked out I’ll be happy.
Finished up the warp engine.
Decided the side of the ship looked kind of empty so I added a bit more detail to it.
And just another full body shot.
UPDATE...
I’ve been too busy to do much work before the end of this month I did clean up a few things and added two more teleport emitters.
Decided to finish off the detail under the nacelle.
Decided to work on the warp ejection port.
Love your imagination!
UPDATE...
Got a little bit more done on the bottom.
Another month another old project. I added more windows and details to the lower rim.
Most of the detail is done on the underside of the primary hull. Now onto the part I hate, the secondary hull.
This damn daylight saving crap has been beating the crap out of me so this might be my last post awhile till I readjust again. Anyway got some work done on the aft end of the ship. Happy with it for the most part.
Finally got a little bit if work on the secondary hull. Feeling mostly better but still feel like wet socks.
Did up some detail for torpedo launcher that I must of lost at some point.
I was getting bored with the other ship so I decided to add some detail and more windows to the command deck of this ship.
Added a bit more detail. Not getting much done really because I’m looking for work and it’s not easy since I haven’t done it since I was a kid. Crippling self doubt isn’t helping me any.
And good luck with the job hunt.
Join our fancy Discord Server!
UPDATE...
I think I done as much as I can this part of the shit. My brain is pretty much turned to mush.
Got frustrated working on the last ship so I thought I’d move to another one. I’ve done two pics showing the full ship just to get a good look at it. Most of the work on the top of the hull is done.
Added some panels and a few more windows.
I added detail to the fantail. I’m happy with it but I think I might rebuild the section because I’m not happy with the segmenting and a few other issues I’m coming up against. Feel like I might need a small break.
Did a little work on rebuilding this part. There is still some segmenting but I’m gonna have to live it. Too many other thing on my mind.
Damn tore up my left knee again while I was asleep again. Well I pretty much finished up the fantail. I also redesigned the tractor beam emitter. I added two new transporter emitters and added some grid lines to the bottom of the primary hull. I’m gonna need to adjust those. They’re a little deeper and thicker than I want them.
Well looks like with a little help from the Autodesk forums I was able to fix the problem I was having so back to work I go.
Added some detail and a few more windows.
I love this design, I'm glad to see you're working on it again.
The ship look great!
The yo yoing weather out here is driving me nuts. I feel like hell but I was able to add some detail and windows to the lower hull.