Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3D-= MKF random trek thread =-

1737475767779»

Posts

  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    edited June 29 #2342
    There think that seems to better match the drawing than what I had before.

    emissary-0396.jpg

    EDIT
    Got a bit tired of flat walls so even though I planned to just do lit boxes I tossed my old tan red interior in.
    emissary-0397.jpg
    Post edited by MadKoiFish on
    ashleytingerLoopholeLizzy777BolianAdmiralHunter GJES
    Each day we draw closer to the end.
  • BolianAdmiralBolianAdmiral749 Torrance, CaliforniaPosts: 2,178Member
    I’m really loving those tan panels on the aft deflector housing. I think the arrowhead on the deflector housing should be flipped horizontal, though.
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    edited June 29 #2344
    If you mean the alignment of the fat side of the delta I am following the layout on most of the ships short of TMP era (EG refit and Miranda)

    not exact images used but ones found vis google. Ok just the Defiant, checked most of the TMG ships and they follow the left to right arrangement. As such you look at a com badge for example fat to the left. Rotate it to a reading path of left to right the fat is on the bottom. This pattern held from the intro of the Excelsior (shuttles etc) through to about when the SOV was introduced and ships following in VOY took on this arrangement (generally as they flip flopped)
    Bill%2BGeorge%2BStar%2BTrek%2BDeep%2BSpace%2BNine%2BUSS%2BDefiant%2Bminiature%2B%252825%2529.jpg
    https://www.ex-astris-scientia.org/scans/mechanics/voyager6.jpg
    https://www.ex-astris-scientia.org/scans/mechanics/voyager5.jpg

    then again I see on the Nova class top nacelle it follows the SOV layout.
    d08e5261b6083a9c96d3256c405d1231.jpg
    but then it is inverted on the bottoms. . . . . . . . . .



    NOW this is all moot unless you refer to having it much smaller and sitting on the rise of the central detail above the deflector.
    Post edited by MadKoiFish on
    Each day we draw closer to the end.
  • BolianAdmiralBolianAdmiral749 Torrance, CaliforniaPosts: 2,178Member
    Wow, ok… I never noticed the inversion before like that.
  • ashleytingerashleytinger807 Central OhioPosts: 764Member
    With the age of 3d models ushered in at the time did they forget to not mirror the textures?
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    edited June 30 #2347
    Given the text is not inverted I would take a guess it is either from sloppiness or just not catching it, or possible intention. These inversions EG whole ship ones started prior to the CGI conversion at large though. EG the change between TMP to TNG then from TNG to the SOV era. The NOVA if I remember right is one of the first designs post the introduction of the SOV.
    Post edited by MadKoiFish on
    Each day we draw closer to the end.
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    Grids and the lot.
    emissary-0400.jpg
    Keep in mind the tonal areas are just for planning, over all materials are not final.
    BolianAdmiralLizzy777JES
    Each day we draw closer to the end.
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    Some extrusions and dividing up of the other panels. Unseen are some grid work etc that needs to be chamfered out after the panels. That tab behind the gray panels I have yet to decide to extrude out or to inset it into the hull.

    emissary-0402.jpg
    ashleytingerLizzy777LoopholeBolianAdmiralJES
    Each day we draw closer to the end.
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    edited July 5 #2350
    Upper panels extruded and other details some decals are the wrong mat too so they are a bit hard to see. Spent most of the day rehacking FF as I was forced to update as there is too much adoption of BS code resulting in blank pages or farked stuff. SIGH.

    emissary-0403.jpg

    emissary-0404.jpg
    extra renders.

    emissary-0406.jpg
    emissary-0407.jpg
    Post edited by MadKoiFish on
    FreakLizzy777LoopholeBolianAdmiralJES
    Each day we draw closer to the end.
  • BolianAdmiralBolianAdmiral749 Torrance, CaliforniaPosts: 2,178Member
    I just love that lounge interior... please don't change it, lol. I'm loving to rollbar details so far!
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    Some more panels in and little things as well as the pennant is now a cut into those panels. I might be redoing some of the panel lines surrounding things.

    emissary-0411.jpg
    emissary-0412.jpg
    emissary-0413.jpg
    BolianAdmiralashleytingerLizzy777JES
    Each day we draw closer to the end.
  • Hunter GHunter G469 Posts: 382Member
    MadKoiFish wrote: »
    EDIT
    Got a bit tired of flat walls so even though I planned to just do lit boxes I tossed my old tan red interior in.
    emissary-0397.jpg

    I really like the look of this area, especially the shape of the windows
    lennier1Loophole
  • publiusrpubliusr286 Posts: 1,402Member
    Those are what the Refit needed for its arboretum
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    ERM damed FF update crashed taking my post. . . . .

    It is apparently past the time to shill the SOTL 2022 calendar. . . . missed the preorder period. (not a affiliate link) I should be posting a teaser/mini sample later on as it is pretty much spoiled when Amazon posted it up for sale.

    The update is not much on the ship, just messing with textures to give the hull a bit more to play with. Using one of my common maps so it could be changed later.

    Also a bit of a failed sensor pit. It has too much chin atm and needs lowering. I had a thought of a alteration in the hull but eugh means deleting all of this and reverting to subdiv to get the geo in. Idea is that central area below the super structure is a raised spine that runs down the length of the hull to the leading edge. vs it being a curved slope with that shape cut in panels. Probably mull it over some before I go further.
    First rando renders with various changes in materials.
    emissary-0414.png

    emissary-0415.png

    Sensor pit rough out.
    emissary-0416.png
    LoopholeashleytingerBolianAdmiralLizzy777AtolmJES
    Each day we draw closer to the end.
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    edited July 23 #2356
    Rough example of what I was talking about in the last post. Means a mess of subdiv to get this into the hull and the example is not anywhere close to the areas the cutouts should be. EG too far from the upper hull etc.
    emissary-0417.jpg?w=200
    Post edited by MadKoiFish on
    Lizzy777BolianAdmiralJES
    Each day we draw closer to the end.
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    edited July 23 #2357
    Slightly better variant, with some of the bridge bits in too give a better idea, all this would be patched into the existing mesh.
    emissary-0418.jpg?w=300
    Post edited by MadKoiFish on
    Lizzy777BolianAdmiralJES
    Each day we draw closer to the end.
  • MadKoiFishMadKoiFish4464 Right in the plumsPosts: 4,605Member
    There we go all welded in, still needs some work here and there and reworking of old details to match up better. THen back to what I had started a few days ago. . . . . heh

    emissary-0420.jpg

    emissary-0421.jpg
    ashleytingerLizzy777LoopholeBolianAdmiralJES
    Each day we draw closer to the end.
Sign In or Register to comment.