Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DThe Romulan Wars

135

Posts

  • JennyJenny2 Posts: 0Member
    XFozzboute wrote: »
    IA’m thinking I might leave the front of the ship smooth and mostly detail the back and sides.

    Don't forget the bird of prey decal. As early as "Balance of Terror" we were told that it was a defining characteristic of Romulan warships.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    I don't know if it will have the decal simply because I don't know if I'll be able to pull it off. I also think there's enough of a bird motif going on with all the detail.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I thought I’d do more work on these wee little beasty.
    2572.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    More stuff added. Not getting much done because I’m too busy cleaning out my garage.
    2573.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    A little bit more added to the back.
    2574.jpg
    And a little bit more to the front. Don’t think I have much more to add.
    2575.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Doing a little grid line test and possible window placement.
    2576.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Finalized grid lines and windows. I also added a bit more to the spine.
    2577.jpg
  • SAMSABER_2012SAMSABER_201267 Posts: 107Member
    XFozzboute wrote: »
    UPDATE...
    Finalized grid lines and windows. I also added a bit more to the spine.
    2577.jpg

    Love this detail and that domed bridge sure is shiny.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    A closer look at the spine with a little more detail added. I might move the module behind the bridge a little bit closer to the bridge.
    2579.jpg
    I added more detail to the saucer rim and chamfered a bunch of edges on the bottom of the saucer. I also worked a bit on the nav deflector.
    2580.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    The grid lines are basically in and I’m starting to lay out the windows.
    2581.jpg
    I’ve also some sensor things to the bottom of the saucer.
    2582.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Windows and grid lines are all finalized. I added more stuff to the nav deflector. My computers’ been acting up lately and now it’s telling me I don’t have a genuine version of windows. If it go all goofy on me I might just done.
    2583.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    A few more bits added like phaser cannon emplacements. A few more lights and a cut out in front of the nav deflector. A minor things to finish up and the bottom of the saucer is done.
    2584.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    I’m calling the top of the saucer done. I added a few more lights, more phase cannon hatches and doors to the upper cargo bays. I also added phaser cannon hatches to the back of the secondary hull.
    2585.jpg
  • trekkitrekki939 Posts: 1,394Member
    Very nice, love it!
    A little bit NX and USS Ares. Very good. :thumb:
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Since my last hard drive died I lost some of the last work I did on this ship so I had to go back and redo a few bits. But while I was at it I fixed a few things and added a few more.
    2640.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Bottom of the saucer is mostly done so I decided to focus on the rim of the saucer and cleaning a few things up.
    2641.jpg
    I also did a bit of work replacing some of the stuff lost on the top of the saucer.
    2642.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    The lower saucer is just about finished.The back of the ship has been kind of bugging me so I decided to make a few changes to it.
    2645.jpg
    My first idea is something like this.
    2643.jpg
    Or maybe something like this with a bunch of greebles thrown in.
    2644.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    The bottom of the saucer is done.
    2646.jpg
    The rim is just about done. I just need to do the airlock. Have a feeling that will be a bit of a pain. The top of the saucer is just about done and I’m starting to put rooms behind the windows.
    2647.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    This is what I’m thinking for the back of the secondary hull.
    2648.jpg
    The saucer rim is done and so is the top of the saucer. I’m starting to place rooms inside.
    2649.jpg
  • kvorshkkvorshk171 Posts: 76Member
    Fozz I think that you and madkoi should be the ones designing a new trek. Awesome work as always
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    Thanks.

    UPDATE...
    I did more work on the back of the ship. It’s starting to shape up.
    2650.jpg
    Out of boredom I blocked out a new non-trek ship. I like it.
    2651.jpg
    2652.jpg
  • kvorshkkvorshk171 Posts: 76Member
    I like the "squid" ship a lot. The contrast between nozzle sizes really works.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Added more stuff to the back and added torpedo launchers. They feel I little big right now. I might go back and redo them. Parts of the back are looking a little funky to me and I can’t really figure out why so I’m gonna give this ship a rest for now.
    2653.jpg
    I added a few more bits to the back of this ship near the impulse engines.
    2654.jpg
  • publiusrpubliusr550 Posts: 1,746Member
    It looks a bit like the Excelsior fantail--but no biggie.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    It's kinda what I was going for.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Add a few more feathers to the back and a few other things like some added detail to the outside of the warp pylons. Thought it was looking a little empty.
    2655.jpg
  • kvorshkkvorshk171 Posts: 76Member
    What are you thinking for a base color for the Birdy, or have you gotten that far yet?
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    A greenish copper.
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Got a little more work on the back of the ship done. Still not happy about the segmenting but I really don’t have the patience to fix it right now.
    2710.jpg
  • XFozzbouteXFozzboute654 Posts: 1,627Member
    UPDATE...
    Spent most of the month fixing a few problems this mesh was having. But I finally added a few windows to the primary hull and that will be about all of them. I didn’t want it to have too many.
    2795.jpg
Sign In or Register to comment.