Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

3DDestiny

1246712

Posts

  • BarBar171 Posts: 0Member
    Bar..........i hate you! of course you know this means war.
    haha nah im just joshin, anyway man how does one get the chances to visit the sets?

    Buy Gold tickets to the convention...
    The Gold ticket includes a set tour. My Brother and i bought two set tour tickets, so we did the entire trip twice. The tour is only an hour though(So we were glad we did it twice).
    btw nice progress on Destiny Vilandra hope to see more soon

    Yeah. Me too!
  • VilandraVilandra0 Posts: 0Member
    I'll have some updates coming soon. Ive been busy with work, and im in the transition of upgrading to Cinema 4D R11.5.
  • SnyderSnyder0 Posts: 0Member
    I hope that Villandra shows his updates as soon as possible ;)
  • Davide_sdDavide_sd4 Posts: 0Member
    Snyder wrote: »
    because there were no updates for a while i'll post my progress:

    untitledd91q.jpg

    Hope to get critic!!!

    And I hope that Villandra shows his updates as soon as possible ;)

    It's good, but if you really want a critic i think you should open your thread!!! :)
  • solariesolarie0 Posts: 0Member
    Davide_sd wrote: »
    It's good, but if you really want a critic i think you should open your thread!!! :)

    Agree it isn’t weary polite to hijack other’s thread.
  • VilandraVilandra0 Posts: 0Member
    Its been a while since ive done anything with this. Ive been busy with work, and with the holiday season here, I havent been doing much 3D.

    Heres what im currently working on.
    76190.jpg
  • PheonixPheonix1 Posts: 0Member
    what part of the ship is this?
  • VilandraVilandra0 Posts: 0Member
    Pheonix wrote: »
    what part of the ship is this?

    I dont know what its called, but its right in front of the large pyramid shaped tower, and directly behind the observation deck.

    Ive temporarily named it "hallway" in my object manager until I figure out what it is. ;)
  • BarrothBarroth0 Posts: 0Member
    ItA’s the Gateroom ^^
  • FreakFreak1088 Posts: 4,361Member
    very cool!
  • Davide_sdDavide_sd4 Posts: 0Member
    nice progress!
  • VilandraVilandra0 Posts: 0Member
    Heres the gateroom again with the added hull plating.

    I was originally going to add the hull plating with a texture, (bump), but then after seeing the close up shots during the show, the plating was clearly modeled, so ill be modeling all of the plating. :eek:

    Now that ive done it this way, I might go back and add some to my atlantis model to see what that would look like..... but then that would just add to the already insane poly count.
    76242.jpg
  • VilandraVilandra0 Posts: 0Member
    Started on the hull plating for the large structure. Theres no possible way of getting all of this accurate. Theres just way too much geometry to accurately duplicate, but I think my attempt is good enough.
    76299.jpg
  • FreakFreak1088 Posts: 4,361Member
    some very nice work there.

    Given what we seen of the ship so far (which really is not a lot) your going to have to fill in some blanks.
  • [Deleted User][Deleted User]2 Posts: 3Member
    looking very good! Good luck with the bottom hehe
  • Davide_sdDavide_sd4 Posts: 0Member
    Really good progresses! :)
  • [Deleted User][Deleted User]2 Posts: 3Member
    WOW Vilandra! I'm glad you mentioned this model in your response to my question on your atlantis model. This is amazing, can't wait for more :)
  • BarrothBarroth0 Posts: 0Member
    Great work on your Destiny ^^, i hope we are going to see some more work if you find some time to get to work on this beauty ^^
  • VilandraVilandra0 Posts: 0Member
    Work slacked off today, so I had some time to open this back up and work on it.

    Heres a couple shots of the shuttle landing area with the air locks.... at least I think they're air locks.

    Going to take a long time to model all the geometry for the hull..... :(

    I'll post more later if time permits.
    80554.jpg80555.jpg
  • FreakFreak1088 Posts: 4,361Member
    Yeah it back!

    Looks good, though what you have modelled does not match what has been shown on the inside of the ship for that area.
    I not really look at the exteria except for when the shuttle leave and lands.

    (Yes I know on TV show they don't always match in inside to the outside.)
  • omnipotentomnipotent658 SwedenPosts: 466Member
    Vilandra wrote: »
    Work slacked off today, so I had some time to open this back up and work on it.

    Heres a couple shots of the shuttle landing area with the air locks.... at least I think they're air locks.

    Going to take a long time to model all the geometry for the hull..... :(

    I'll post more later if time permits.

    Very nice! and i hear ya about the geom im gonna try and texture most of the hullplate geom as thats how most of it is done in the show.
    btw here are some screencapped 720pHD refs from the last 2 eps i did you might find them usefull.

    space
    http://www.megaupload.com/?d=X5QIUIII

    Divided
    http://www.megaupload.com/?d=A7SNHXIJ
  • VilandraVilandra0 Posts: 0Member
    More progress on the shuttle docking/landing area.
    80637.jpg
  • mikalamikala176 Posts: 440Member
    Simply sexy!
  • FreakFreak1088 Posts: 4,361Member
    Looks great
  • VilandraVilandra0 Posts: 0Member
    Just a little update....

    My goal is to complete this so I can make some animations with it. I would really like to recreate the opening shot from the pilot episode.
    80838.jpg80839.jpg
  • colbmistacolbmista2 Posts: 0Member
    whats with teh round structure behind the obersvation deck?
  • VilandraVilandra0 Posts: 0Member
    colbmista wrote: »
    whats with teh round structure behind the obersvation deck?

    I dont know... but its in all the screen caps I have.
  • colbmistacolbmista2 Posts: 0Member
    ive never seen it in any screen caps...
  • somacruz145somacruz1450 Posts: 0Member
    Wow that looks better than the thumbnail on the first page :p I am not a big fan of the show itself but I like this vessel very much and it seems that you're doing a great job with the details.
  • VilandraVilandra0 Posts: 0Member
    See attached
    80843.jpg
Sign In or Register to comment.