UPDATE...
Well I thought it’s the end of the month so I might as well go do some work on the Sirius.
I started to work on ideas for textures in the shuttle bay. I’m pretty happy with the result so far. I still need to dirty it up a bit.
Just wanted to see how it looks from outside the windows.
And here is an interior shot. I added some yellow things to the wall and a door. Doors are always a good idea.
UPDATE...
I added some more plant-ons to the wall and I also decided to add some observation rooms to the sides.
I was getting a bit tired of working on the Sirius so I went and started on textures cor the bridge and the command deck of the Ben Aventure. I’m pretty happy with it so far.
UPDATE...
Got a little bit more done on the spine. I decided to re-texture the aft section but it’s being a real pain in the ass and the heat around hear is driving me nuts so I decided to take a break.
I decided to add some construction arms to my drydock. Right now they are just blocked in ideas for what I want to do.
UPDATE...
Ok. Back to the bonny. I go the unwrapping problem taken care of I think. So I started on the re-texturing of the aft section.
I wasn’t happy with the lower part of the back because it looked to blank to me. So I added a couple of things.
I also redid the top.
UPDATE...
The aft end is now done and so is the impulse engine.
Now all the little bits are done. I can focus on the saucer and the other warp engine. I have to fix some issues with the lower saucer and put rooms behind the windows.
UPDATE...
The bottom of the saucer is completed.
I thought I throw in what the top of the saucer looks like in the mirror universe. I know it should say I.S.S. instead of U.S.S. but I just haven’t done that yet. So I don’t want to hear about it.
I also decided on other names for the ship.
Moller
Reardon
Daniels
Ptacek
Well I have only just found this topic and you are a very talented artist. You bounce around a lot but you get things done very quickly and to a high standard... I do hope you are putting those talents to work in the Trek world some where...
UPDATE...
I haven’t been doing a lot of work lately because I messed up my back last friday and had trouble getting around but I’m feeling much better now and decided to get some work done. So I worked a bit on some basic textures for the dry dock. I forgot how segmented these parts are but oh well.
Thanks.
UPDATE...
Well I thought I’d take a small break from my dock and work on some ideas for my Enterprise. First, an idea for the warp engine. I’ll be redoing the final version to increase the segments.
Underneath the saucer where it meets with the neck.
The start of the warp engine.
Posts
Well I thought it’s the end of the month so I might as well go do some work on the Sirius.
I started to work on ideas for textures in the shuttle bay. I’m pretty happy with the result so far. I still need to dirty it up a bit.
Just wanted to see how it looks from outside the windows.
And here is an interior shot. I added some yellow things to the wall and a door. Doors are always a good idea.
I added an elevator. And started to work on the back room.
I got the side walls with the windows attached and added stuff to the roof.
UPDATE...
I added some more plant-ons to the wall and I also decided to add some observation rooms to the sides.
I was getting a bit tired of working on the Sirius so I went and started on textures cor the bridge and the command deck of the Ben Aventure. I’m pretty happy with it so far.
keep it going!
S.
UPDATE...
The command deck is pretty dirty now. I’m happy with it.
I also thought I’d try doing the texture for the spine.
Got a little bit more done on the spine. I decided to re-texture the aft section but it’s being a real pain in the ass and the heat around hear is driving me nuts so I decided to take a break.
I decided to add some construction arms to my drydock. Right now they are just blocked in ideas for what I want to do.
Ok. Back to the bonny. I go the unwrapping problem taken care of I think. So I started on the re-texturing of the aft section.
I wasn’t happy with the lower part of the back because it looked to blank to me. So I added a couple of things.
I also redid the top.
The aft end is now done and so is the impulse engine.
Now all the little bits are done. I can focus on the saucer and the other warp engine. I have to fix some issues with the lower saucer and put rooms behind the windows.
Ok, I’ve started on the textures for the upper saucer.
I think I’m just about done with the top of the saucer.
The bottom of the saucer is completed.
I thought I throw in what the top of the saucer looks like in the mirror universe. I know it should say I.S.S. instead of U.S.S. but I just haven’t done that yet. So I don’t want to hear about it.
I also decided on other names for the ship.
Moller
Reardon
Daniels
Ptacek
Well, it’s done. One last wip image.
And the completed ortho.
It’s time to move back to the Starfleet Museum ships.
I haven’t been doing a lot of work lately because I messed up my back last friday and had trouble getting around but I’m feeling much better now and decided to get some work done. So I worked a bit on some basic textures for the dry dock. I forgot how segmented these parts are but oh well.
Here are a few more shots of the dock with a few more details added and a couple of chamfered edges.
Cheers, S.
UPDATE...
Got some random details added including the start of four airlocks.
And a little bit added to the ops center including three windows.
UPDATE...
Well I thought I’d take a small break from my dock and work on some ideas for my Enterprise. First, an idea for the warp engine. I’ll be redoing the final version to increase the segments.
Underneath the saucer where it meets with the neck.
The start of the warp engine.