Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

Greetings!

Welcome to the fancy new Scifi-Meshes.com! You old username and password should work. If not, get in touch with staff either here, on Facebook or on Discord.

For a quick summary on what's new, check out this thread.
You should also check out the Community Guidelines here.
You can check out most recent posts here or by clicking the handy links on the top menu or the sidebar.

You can dismiss this message by clicking the little X in the top right corner.

Ships of the Federation Civil War

1568101137

Posts

  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    Working out a few details on one of the spoon head ships.:D
    210-1.jpg
    Here you can see the M/ARA ejection and antimatter pod assemblies port. The square at the bottom of the hull is going to be for a tractor beam. I've also added eight lifeboats.
    212-1.jpg
    Topside I've added some reaction control thrusters and I'm thinking about more phaser placements.
    213-1.jpg
  • AresiusAresius338 Posts: 4,125Member
    It's just sweet.
  • Benji7869Benji78690 Posts: 0Member
    This thing is getting better all the time. Is the "spoon head" ship federation or some other race that plays out in the Civil War.
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    It's the Cardasians.
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    A small update.
    Playing with phaser strip placement. I've got three alternatives so far.
    214-1.jpg
    215-1.jpg
    216-1.jpg
    Must be tuesday because the Tractor Beam emitter is being installed. I'll throw on a few small details and it will be done.
    217-1.jpg
    Here is the Nav deflector and maybe a ventral phaser strip.
    218-1.jpg
  • AresiusAresius338 Posts: 4,125Member
    I'd go with version two of the strips. Version one holds them too close IMHO and version three makes it look like a warship.
  • Aresius wrote: »
    I'd go with version two of the strips. Version one holds them too close IMHO and version three makes it look like a warship.

    civil war im sure they would need a more heavly armed ship
  • StarshipStarship231 São Paulo - BrasilPosts: 1,754Member
    Version two.
    But, since youA’re in a war, heavly armed is better. As an alternative, can I suggest you to place additional torpedo launchers at the sides?
  • Zhor2395Zhor2395173 MN, USAPosts: 67Member
    i like'em third one, but whichever you settle on really works for me too :)
    "Orange, really?! Ugh."
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    Starship wrote: »
    Version two.
    But, since youA’re in a war, heavly armed is better. As an alternative, can I suggest you to place additional torpedo launchers at the sides?
    I'm probably gonna go with version two but I don't want this ship to be too heavily armed. It's not meant to be a warship. Your idea for torp launchers is a good one but I thought if I did addd more I could do something more like the Excelsior.

    UPDATE...
    A small detour.
    Engines for a Bajoran intercepter.
    219-1.jpg
    A quick block in of a one man shuttle pod for the federation ships.
    220-1.jpg
    221-1.jpg
  • AresiusAresius338 Posts: 4,125Member
    Interesting.
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    I haven't felt like doing too much recently but I have gotton a very small amount of work done.
    I added winglets to the shuttle and what might be a small storage area above the engine.
    222-1.jpg
    Just wanted to seee what they might look like with the ship.
    223-1.jpg
    More lifeboats and grid lines.
    224.jpg
  • AresiusAresius338 Posts: 4,125Member
    and a Borg baby-cube floating around....

    runs
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    Aresius wrote: »
    and a Borg baby-cube floating around....

    runs
    I forgot to mention that.:D
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    Two more ships. I'm gonna try to cut down on the new designs and focus on finishing at least one or two before I come up with anything new.
    U.S.S. Hedora. Might be a Grissom like ship. My original idea was to update the U.S.S. Freedom but it turned in to this.
    225-1.jpg
    226-1.jpg
    The Klingon Bird of Honor. I never liked the look of the Vor'Cha or the Negh'Var so this will a variation of the Bird of Prey.
    227-1.jpg
    228-1.jpg
  • uniderthuniderth0 Posts: 0Member
    You have some awesome work here! I always though a Federation Civil War would be the conflict that Captain Garth in TOS was involved in.
  • AresiusAresius338 Posts: 4,125Member
    Ok, the "Grissom"-whatever looks very interesting. Reminds me a bit to a mix between a Nova and the Constellation/Cheyenne.
    Meaning the upside-down turned nacelles.

    The Bird of Honour looks good so far. Only the neck looks like the pre-TOS B'rel.
  • bbeltbbelt0 Posts: 0Member
    You know, after the big success with the Bird of Prey as an effective ship for the Klingons, you think that would make more designs based on it. Even in fanfic. Your Bird of Honor may be very interesting. Actually you willing to do other alien ships overall is a good cut away from the norm in modeling.

    The Hedora reminds me of the Prometheus's saucer section in attack mode.
  • Prime_8Prime_80 Posts: 0Member
    looks great to me
    -always good stuff man
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    More lifeboats and grid lines. I took some of the sensor things near the bridge and placed then on the hull. I had to rebuild the nose of the ship ther was a little bit of an over bite but I fixed it.
    229-1.jpg
    Some minor work on the Nav deflector.
    230-1.jpg
    I fiddled abit with the Klingon ship. I thought the bridge area should look like a crown.
    231-1.jpg
  • AresiusAresius338 Posts: 4,125Member
    If I see right, that're no sensor arrays that're transporter arrays.
    Nice work anyway.

    Also with the Klingon dude.
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    I'm talking about the square bits you can see here.
    129.jpg
    137.jpg
  • AresiusAresius338 Posts: 4,125Member
    Ah, these..

    I thought you refer to the orange-brown things at their side.
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    Some panels added finally and the beginning of the lower phaser strip.
    232-1.jpg
    233-1.jpg
  • AresiusAresius338 Posts: 4,125Member
    Nice work, so far.
  • StarshipStarship231 São Paulo - BrasilPosts: 1,754Member
    It's a beauty, noneless than this. :)
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    Just a small update on the Bajoran intercepter.
    234-1.jpg
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    More Bajoran stuff.
    235-1.jpg
    236-1.jpg
  • bbeltbbelt0 Posts: 0Member
    Interesting to see where this one goes. Not much to go on with the bajoran design lineage.
  • XFozzbouteXFozzboute571 Posts: 1,600Member
    UPDATE...
    I thought I'd play a bit with the klingon ship. I just added a few things. I really like the KLingon ships from Enterprise so I might throw in a few details based on those ships.
    237-1.jpg
    238-2.jpg
Sign In or Register to comment.