Greetings!

Welcome to Scifi-Meshes.com! Click one of these buttons to join in on the fun.

Greetings!

Welcome to the fancy new Scifi-Meshes.com! You old username and password should work. If not, get in touch with staff either here, on Facebook or on Discord.

For a quick summary on what's new, check out this thread.
You should also check out the Community Guidelines here.
You can check out most recent posts here or by clicking the handy links on the top menu or the sidebar.

You can dismiss this message by clicking the little X in the top right corner.

3DWarp Fighter remake

kadenkaden285 JapanPosts: 91Member
edited January 5 in Work in Progress #1
gdgs876t941h.jpg

Hello, long time no see.
Recently I have been getting back into 3d and I decided my first major project would be to remake my fighter. I originally made it for the graduation project of the 3d course I was on.
The original was made in Lightwave, the new one is being made in blender.
I'm using it to learn blender as well, so it has been a little slow to start, getting used to everything.

Here is what it looked like, some materials are a little off.
aqf2muswifx4.jpg

And this is what it turned into at the start
ac7vx86x82ul.jpg
I have been updating a bunch of things on it, and changing it around a little to make it feel more slick.
I hope to post more as I carry on building.
Post edited by Guerrilla on
Tagged:
Rekkert
  • Like - Rekkert on October 22, 2019.
Lizzy777
  • Like - Lizzy777 on October 22, 2019.
evil_genius_180
  • Like - evil_genius_180 on October 22, 2019.
Freak
  • Like - Freak on October 22, 2019.
Brandenberg
  • Like - Brandenberg on November 12, 2019.
wolfman
  • Like - wolfman on January 20, 2020.
«13

Posts

  • GuerrillaGuerrilla450 HelsinkiPosts: 2,551Administrator
    Oh nice. I always liked that one.
    Comco: i entered it manually in the back end
    Join our fancy Discord Server!
  • ComcoComco295 Posts: 1,267Administrator
    Same. I like the subtle changes you've made as well. Each of them are an improvement over the original, imo. Looking forward to seeing you progress with this one!
  • kadenkaden285 JapanPosts: 91Member
    Thanks. I hope I can get it finished up quickly.
    The main shapes took a while to build, but now that they have been finalised, I have moved on to the medium sized details, impulse, deflector, major panels etc.
    Lots of building, deleting, building lol. But should be quicker.
  • RekkertRekkert1086 Buenos Aires, ArgentinaPosts: 1,807Member
    Nice! I'm liking the new details around the Bussard collectors. I'm not too sold on the bright orange things at the bottom though, what are those?
    Keep it up!
    For my finished Trek bridges and other works of mine, visit my portfolio
    Feel free to contact me if you're interested in commissions!​
  • kadenkaden285 JapanPosts: 91Member
    It's the impulse intake thingy, like the Runabout has.
  • evil_genius_180evil_genius_180996 Posts: 9,109Member
    That's a really sweet design. I like the new tweaked version even better than the original, which is really nice too. :)
  • FreakFreak628 Posts: 3,743Member
    This is a very nice fighter and I can really see a squad of these being assigned to the Akria Class.
  • commandersozocommandersozo192 Posts: 467Member
    awesome. look forward to the development. is ther a possibility to see some orthos too?
  • kadenkaden285 JapanPosts: 91Member
    Here's some orthos I did while I was blocking it out.
    vb2qkmnya9d3.jpg

    Engines and front. (didn't mask the hdri on the engine pic)
    hy3fd7uwtu1v.jpg
    o7vxbctd0i58.jpg

    I haven't finalised any materials yet, so colours are just temporary. I have to learn more about uvs and baking textures in blender first before I get some proper colours on there.
    Freak
    • Like - Freak on October 23, 2019.
    evil_genius_180
    • Like - evil_genius_180 on October 23, 2019.
    Lizzy777
    • Like - Lizzy777 on October 23, 2019.
    MadKoiFish
    • Like - MadKoiFish on October 23, 2019.
    Brandenberg
    • Like - Brandenberg on November 12, 2019.
  • FreakFreak628 Posts: 3,743Member
    This is looking really Good.
  • srspicersrspicer216 Posts: 136Member
    I remember this design, always liked it! Looking forward to the new version.
  • kadenkaden285 JapanPosts: 91Member
    yu4cr7pk1656.png

    I found out how to make ortho renders.
    Added some more panels.
    Freak
    • Like - Freak on October 24, 2019.
    Rekkert
    • Like - Rekkert on October 24, 2019.
    Lizzy777
    • Like - Lizzy777 on October 25, 2019.
    Brandenberg
    • Like - Brandenberg on November 12, 2019.
  • commandersozocommandersozo192 Posts: 467Member
    thnx a lot. looks great.
  • BarricadeBarricade186 Posts: 153Member
    Just curious, but are you a member over at Hardlight Productions (the guys working on Freespace SCP)? Because I know several of the modders/modelers there are massive fans of your previous works, and some have directly cited that the original design for this fighter is what gave them ideas in the first place. Nobody's copied it that I know of, just been heavily inspired by it.

    As for the new design itself, I like the subtle touch in going from two internal light sources in the bussards on the old design, to three light sources. A small thing, but its enough to definitely make a viewer believe this is the Mk II version, or the direct successor of the original.
  • kadenkaden285 JapanPosts: 91Member
    Really? No I'm not a member. First I have heard of them, I will take a look.

    Yeah adding little extra details like that and getting the shapes looking more smooth is my goal.
    At the moment I am deciding on the deflector, keeping it Defiant style, or going to a smaller dish with the glow from behind.
  • publiusrpubliusr230 Posts: 1,188Member
    One of my favorite fighter concepts.
  • BarricadeBarricade186 Posts: 153Member
    I put my reply in a PM for you Kaden, so I don't clutter up this topic with talk outside of the forum.

    BTW, just on a lark, have you ever thought about installing an aft-facing micro-torpedo launcher on this, between/below the impulse drives? Would make for one mean (but hilarious) surprise for any poor soul trying to get on it's six.
  • kadenkaden285 JapanPosts: 91Member
    Yup it has a rear launcher.

    Quick render with the new deflector. I rebuilt a lot of the geometry in the area but I haven't finished the details yet. I want to add some orange panelling like on Voyagers secondary deflector.

    injgpjxdu0j3.jpg
    Lizzy777
    • Like - Lizzy777 on November 6, 2019.
    evil_genius_180
    • Like - evil_genius_180 on November 6, 2019.
    Freak
    • Like - Freak on November 7, 2019.
    MadKoiFish
    • Like - MadKoiFish on November 10, 2019.
    Brandenberg
    • Like - Brandenberg on November 12, 2019.
  • BolianAdmiralBolianAdmiral265 Torrance, CaliforniaPosts: 1,696Member
    Very nice. Keep it up!
  • evil_genius_180evil_genius_180996 Posts: 9,109Member
    I like the deflector. It's a necessary component, but tucking it under the nose like that doesn't ruin the lines of the fighter.
  • kadenkaden285 JapanPosts: 91Member
    I think the deflector area is basically done, time to move on to something else.

    xo7gpib2aooo.jpg
    evil_genius_180
    • Like - evil_genius_180 on November 9, 2019.
    Lizzy777
    • Like - Lizzy777 on November 9, 2019.
    Freak
    • Like - Freak on November 9, 2019.
    Rekkert
    • Like - Rekkert on November 10, 2019.
    MadKoiFish
    • Like - MadKoiFish on November 10, 2019.
    Brandenberg
    • Like - Brandenberg on November 12, 2019.
  • kadenkaden285 JapanPosts: 91Member
    I am fixing up the bussard area, left is old one, right new one. The part just behind the glass.
    Which is best?

    quqlx2pw2kyh.png
    evil_genius_180
    • Like - evil_genius_180 on November 9, 2019.
    Freak
    • Like - Freak on November 9, 2019.
    Lizzy777
    • Like - Lizzy777 on November 9, 2019.
    MadKoiFish
    • Like - MadKoiFish on November 10, 2019.
  • evil_genius_180evil_genius_180996 Posts: 9,109Member
    The deflector looks great and I like the new bussard. It's a small change, but it flows so much better.
  • FreakFreak628 Posts: 3,743Member
    I agree with EG.
    I am loving the details you have put into that defector.
  • kadenkaden285 JapanPosts: 91Member
    Thanks guys.
    I think I will try make the grey parts all one piece and see how that looks. And also try to get the glass looking like its attached somehow.

    I have been making some small decals based on the ones on Voyagers hull. Any suggestions for federation style decals or signs are welcome.

    1v3983sumacq.jpg

    MadKoiFish
    • Like - MadKoiFish on November 10, 2019.
    Lizzy777
    • Like - Lizzy777 on November 11, 2019.
  • kadenkaden285 JapanPosts: 91Member
    Little bit more done on the underside, and I also worked on the bussards some more today. I remade the glass and set some new materials for it.

    i952qigd4wn2.jpg
    Lizzy777
    • Like - Lizzy777 on November 11, 2019.
    Rekkert
    • Like - Rekkert on November 11, 2019.
    Freak
    • Like - Freak on November 11, 2019.
    Brandenberg
    • Like - Brandenberg on November 12, 2019.
  • Lizzy777Lizzy777335 PNWPosts: 472Member
    edited November 2019 #28
    kaden wrote: »
    I have been making some small decals based on the ones on Voyagers hull. Any suggestions for federation style decals or signs are welcome.

    For this model, I'd suggest taking inspiration from fighter aircraft. Below the cockpit, you'd have the crew names of the pilots and operators. Operational signs for engineering. Squadron insignias on the wings and/or tail (or in this case, warp nacelles). Warning signs, NO STEP, and so on.

    Basically, anything you see on a decal sheet for a model jet, you can stick on here. Since Trek is a little light on individual unit insignias and the like, it's a good chance to get creative in that area.
    Post edited by Lizzy777 on
    "Cry 'Havoc!,' and let slip the corgies of war!"
  • srspicersrspicer216 Posts: 136Member
    Looking better and better, would like to create a physical model of this.
  • RekkertRekkert1086 Buenos Aires, ArgentinaPosts: 1,807Member
    I love the new details on the impulse intakes, everything's shaping up together nicely!
    For my finished Trek bridges and other works of mine, visit my portfolio
    Feel free to contact me if you're interested in commissions!​
  • kadenkaden285 JapanPosts: 91Member
    Thanks for the tips, I will take a look at real fighters for ideas.

    Here is the latest, getting some more details in so it is starting to look like the original.
    g55i83esuvcu.jpg
    MadKoiFish
    • Like - MadKoiFish on November 11, 2019.
    evil_genius_180
    • Like - evil_genius_180 on November 11, 2019.
    Freak
    • Like - Freak on November 11, 2019.
    Rekkert
    • Like - Rekkert on November 12, 2019.
    Lizzy777
    • Like - Lizzy777 on November 12, 2019.
    Brandenberg
    • Like - Brandenberg on November 12, 2019.
    srspicer
    • Like - srspicer on November 13, 2019.
    wolfman
    • Like - wolfman on January 23, 2020.
Sign In or Register to comment.